Showing 25–48 of 176 results
7905 Voltage Regulator
Specifications:
- 5V Negative Voltage Regulator
- Output Voltage: -5V
- Output Current: 1.5A
- Minimum Input Voltage is 7V
- Maximum Input Voltage is 25V
- Operating current(IQ) is 5mA
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum 125 degree Celsius
- Available in TO-220 and KTE package
7912 IC MC 7912 CT
79M05 TO-220-3 Linear Voltage Regulator (Pack of 3 ICs)
Features:
- Minimum Supply Voltage (V):– 7
- Max. Operating Current (mA):5
- Product Type:Linear Voltage Regulator
- Product Series:79XX
- Operating Temperature Range (°C):-20 to 120
- Dimensions (mm) LxWxH:10.28 x 4.82 x 9.28
- Number of Outputs:1 Output
- Polarity:Negative
- Output Voltage:– 5 V
- Output Current:500 mA
- Output Type:Fixed
- PSRR / Ripple Rejection:66 dB
- Load Regulation:100 mV
- Line Regulation:50 mV
79M09 TO-220-3 Linear Voltage Regulator (Pack of 3 ICs)
Features:
- Minimum Supply Voltage (V):–12
- Max. Operating Current (mA):5
- Product Type:Linear Voltage Regulator
- Product Series:79XX
- Operating Temperature Range (°C):-20 to 120
- Dimensions (mm) LxWxH:10.28 x 4.82 x 9.28
- Mounting Type:Through Hole
- Polarity:Negative
- Output Voltage:– 9 V
- Output Current:500 mA
- Output Type:Fixed
- Load Regulation:100 mV
79M12 TO-220-3 Linear Voltage Regulator (Pack of 3 ICs)
Specifications:
- Minimum Supply Voltage (V):–14
- Max. Operating Current (mA):5
- Product Type:Linear Voltage Regulator
- Product Series:79XX
- Operating Temperature Range (°C):-20 to 120
- Dimensions (mm) LxWxH:10.28 x 4.82 x 9.28
- Mounting Type:Through Hole
- Polarity:Negative
- Output Voltage:– 12 V
- Output Current:500 mA
- Output Type:Fixed
- Load Regulation:100 mV
817C Optocoupler DIP IC
AD620AN IC
Features:
- Easy to use
- Gain set with one external resistor (Gain range 1 to 10,000)
- Wide power supply range (±2.3 V to ±18 V)
- Higher performance than 3 op-amp IA designs
- Available in 8-lead DIP and SOIC packaging
- Low power, 1.3 mA max supply current
- Excellent dc performance (B grade)
- 50 μV max, input offset voltage
- 0.6 μV/°C max, input offset drift
- 1.0 nA max, input bias current
- 100 dB min common-mode rejection ratio (G = 10)
- Low noise
- 9 nV/√Hz @ 1 kHz, input voltage noise
- 0.28 μV p-p noise (0.1 Hz to 10 Hz)
- Excellent ac specifications
- 120 kHz bandwidth (G = 100)
- 15 μs settling time to 0.01%
ADC0804LCN PDIP-20 Analog to Digital Converter-ADC
Features:
- Supply voltage range from 4.5V to 6.3V
- The sampling rate is 9.708KSPS
- Compatible with 8080 microprocessor derivatives, no interfacing logic needed
- Differential analog voltage inputs
- Logic inputs and outputs meet both MOS and TTL voltage level specifications
- Works with 2.5V (LM336) voltage reference
- On-chip clock generator
- Operating temperature range -40°C to 85°C
- No zero adjust required
- Easy interface to all microprocessors and operates as a standalone device
- Applications: Signal Processing
ADC0808CCN PDIP-28 Analog to Digital Converter-ADC
AMS1117 5V, 1A, SOT-223 Voltage Regulator IC (Pack of 5 ICs)
Specifications:
- Fixed/Adjustable 3-terminal Linear voltage regulator
- Low Drop-Out (LDO) Voltage regulator
- Fixed Voltage type: 5V
- The output current is 1000mA
- Maximum Drop-out Voltage: 1.3V
- In-built Current Limiting and thermal protection.
- The operating junction temperature is 125°C
- Available in SOT-223, TO-252 and SO-8 Package
AMS1117-3.3 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module
AMS1117-3.3V, 1A, SOT-223 Voltage Regulator IC (Pack of 5 ICs)
AMS1117-ADJ 1A 5V, Voltage Regulator IC (Pack of 5 ICs)
AO3400 30V 5.8A N-Channel MOSFET SOT-23 (Pack of 5)
AT89S52-24PU DIP-40 Microcontroller
Specification:
- Package/Case: DIP-40
- 8K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 256 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Three 16-bit Timer/Counters
- Eight Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
ATmega 16A-PU PDIP-40 Microcontroller
Specifications :
- Advanced RISC Architecture.
- 32 x 8 General Purpose Working Registers.
- Fully Static Operation.
- Up to 16 MIPS Throughput at 16 MHz.
- Advanced RISC Architecture.
- On-chip 2-cycle Multiplier.
- High Endurance Non-volatile Memory segments.
- 16 Kbytes of In-System Self-programmable Flash program memory.
- 512 Bytes EEPROM.
- 1 Kbyte Internal SRAM.
- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
- Optional Boot Code Section with Independent Lock Bits.
- In-System Programming by On-chip Boot Program.
- True Read-While-Write Operation.
- Programming Lock for Software Security.
- JTAG (IEEE std. 1149.1 Compliant) Interface.
- Boundary-scan Capabilities According to the JTAG Standard.
- Extensive On-chip Debug Support.
- Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface.
- Peripheral Features.
- Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes.
- One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode.
- Real Time Counter with Separate Oscillator.
- Four PWM Channels.
- 8-channel, 10-bit ADC.
- 8 Single-ended Channels.
- 7 Differential Channels in TQFP Package Only.
- 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x.
- Byte-oriented Two-wire Serial Interface.
- Programmable Serial USART.
- Master/Slave SPI Serial Interface.
- Programmable Watchdog Timer with Separate On-chip Oscillator.
ATmega 32A-AU / ATmega32A U-TH (SMD Package) TQFP-44 PIN Microcontroller
Features:
- Advanced RISC architecture
- 131 Powerful instructions
- Fully static operation
- Up to 16MIPS throughput at 16MHz
- On-chip 2-cycle multiplier
- High endurance non-volatile memory segments
- Optional boot code section with independent lock bits
- In-system programming by the on-chip boot program
- True Read-While-Write operation
- Programming lock for software security
Atmega328 U IC Micro-controller
Specifications:
- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general-purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
ATmega328P AU TQFP-32 Microcontroller
ATmega328P U-TH Microcontroller
Atmega328P-U IC Micro-controller
Specifications:
- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general-purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
ATMega32A Microcontroller IC
Features:
- Advanced RISC architecture
- 131 Powerful instructions
- Fully static operation
- Up to 16MIPS throughput at 16MHz
- On-chip 2-cycle multiplier
- High endurance non-volatile memory segments
- Optional boot code section with independent lock bits
- In-system programming by the on-chip boot program
- True Read-While-Write operation
- Programming lock for software security
ATmega8A AU TQFP-32 Microcontroller
Features:
- Advanced RISC architecture – On-chip 2-cycle multiplier
- High endurance, non-volatile memory segments
- QTouch® library support – Capacitive touch buttons, sliders, and wheels
- Peripheral features – Byte-oriented Two-Wire serial interface
- Power-on reset (POR) and programmable brown-out detection
- Internal Calibrated RC oscillator
- External and internal interrupt sources
- Five sleep modes – Idle, ADC noise reduction, power-save, power-down, and standby