Showing 133–144 of 176 results
Filter by price
IC
OP07CP Operational Amplifier IC ( pack of 2 )
₹42.48 (Inc. GST)₹36.00 (+18% GST Extra)
Features :
- Low Noise
- No External Components Required
- Replace Chopper Amplifiers at a Lower Cost
- Wide Input-Voltage Range: 0 to ±14 V (Typ)
- Wide Supply-Voltage Range: ±3 V to ±18 V
PC817 2 CH Optocoupler Isolation Module
₹70.00 (Inc. GST)₹59.32 (+18% GST Extra)
Specification:
- I/O Isolation for MCUs (Micro Controller Units)
- Noise Suppression in Switching Circuits
- Driving Port Signal Voltage: 3.6-24V
- Output Port Voltage Port: 3.6-30V
- Output Can Be Switched From Pull-Up or Pull-Down With Jumpers.
PC817 4 CH Optocoupler Isolation Module
₹119.99 (Inc. GST)₹101.69 (+18% GST Extra)
Specifications:
- I/O Isolation for MCUs (Micro Controller Units)
- Noise Suppression in Switching Circuits
- Driving Port Signal Voltage: 3.6-24V
- Output Port Voltage Port: 3.6-30V
- Output Can Be Switched From Pull-Up or Pull-Down With Jumpers
PCA9685BS+118 NXP Semiconductor
₹197.06 (Inc. GST)₹167.00 (+18% GST Extra)
Features:
- 16 LED drivers. Each output programmable at:
- Off
- On
- Programmable LED brightness
- Programmable LED turn-on time to help reduce EMI
- 25 MHz typical internal oscillator requires no external components
- External 50 MHz (max.) clock input
- Internal power-on reset
- Noise filter on SDA/SCL inputs
- Edge rate control on outputs
- No output glitches on power-up
- Supports hot insertion
- Low standby current
- Operating power supply voltage range of 2.3 V to 5.5 V
- 5.5 V tolerant inputs
- -40 °C to +85 °C operation
- ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101
- Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
- Packages offered: HVQFN28
PCA9685PW+118 SMD IC
₹247.80 (Inc. GST)₹210.00 (+18% GST Extra)
Features
- NXP Semiconductors
- RoHS Compliant
- Lead Free
- HALOEN Free
PCF8574T SMD 8 bit I/O expansion for I2C – SOIC16
₹147.50 (Inc. GST)₹125.00 (+18% GST Extra)
Specifications:
- I2C-bus to parallel port expander
- 100 kHz I2C-bus interface (Standard-mode I2C-bus)
- Operating supply voltage 2.5 V to 6 V with non-overvoltage tolerant
- I/O held to VDD with 100 A current source
- 8-bit remote I/O pins that default to inputs at power-up
- Latched outputs directly drive LEDs
- Total package sink capability of 80 mA
- Active LOW open-drain interrupt output
- Eight programmable slave addresses using three address pins
- Low standby current (2.5 A typical)
- 40 C to +85 C operation
- ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM per JESD22-C101
PCF8575CTS/1118 SMD IC Remote 16-bit I/O expander for I2C-bus NXP
₹194.70 (Inc. GST)₹165.00 (+18% GST Extra)
Features:
- Operating supply voltage from 4.5 to 5.5 V
- Low standby current consumption of 10 µA maximum
- I2C-bus to parallel port expander
- 400 kbits/s FAST I2C-bus
- Open-drain interrupt output
- 16-bit remote I/O port for the I2C-bus
- Compatible with most microcontrollers
- Latched outputs with high current drive capability for directly driving LEDs
- Address by 3 hardware address pins for use of up to 8 devices
- SSOP24 package
PCF8575TS/1118 SMD IC Remote 16-bit I/O expander for I2C-bus NXP
₹194.70 (Inc. GST)₹165.00 (+18% GST Extra)
Features:
- Operating supply voltage 2.5 to 5.5 V
- NXP Semiconductors Make
- Remote 16-bit I/O expander for I2C-bus
- Low standby current consumption of 10 µA maximum
- I2C-bus to parallel port expander
- 400 kbits/s FAST I2C-bus
- Open-drain interrupt output
- 16-bit remote I/O port for the I2C-bus
- Compatible with most microcontrollers
- Latched outputs with high current drive capability for directly driving LEDs
- Address by 3 hardware address pins for use of up to 8 devices
- SSOP24 package.
PIC 18F4550 IC
₹678.50 (Inc. GST)₹575.00 (+18% GST Extra)
Specifications:
- CPU:8-bit
- Total Number of Pins:40
- Operating Voltage:+4.0 to +5.5 V (+5.5V being absolute maximum)
- Number of programmable I/O pins:35
- CPU Speed:12 MIPS
- RAM Bytes:2KBytes
- EEPROM:256Bytes
- Watchdog Timer:Programmable Watchdog Timer with Separate On-chip Oscillator
- External Oscillator:Up to 48MHz
- Internal Oscillator:32KHz-8MHz Calibrated Internal Oscillator
PIC16F1503-I/SL SMD IC
₹76.70 (Inc. GST)₹65.00 (+18% GST Extra)
Specification:
- Enhanced mid-range core with 49 instructions and 16 stack levels
- Flash program memory with self-read/write capability
- High endurance flash memory (HEF)
- Internal 16MHz oscillator
- 4x Standalone PWM
- Complementary waveform generator (CWG)
- Numerically controlled oscillator (NCO)
- 2x Configurable logic cell (CLC)
- Integrated temperature indicator
- 25mA Source/sink current I/O
- 2x 8-bit Timers (TMR0/TMR2)
- Extended watchdog timer (WDT)
PIC16F877A Micro-controller IC
₹330.40 (Inc. GST)₹280.00 (+18% GST Extra)
Specifications:
- Program Memory Type: Flash
- ADC Input: 8 ch, 10-bit
- Operating Voltage Range (V): 2.5V to 5V
- Digital Communication Peripherals: 1-UART, 1-SPI, 1-I2C1-MSSP(SPI/I2C)
PIC16F886 Microcontroller IC
₹182.90 (Inc. GST)₹155.00 (+18% GST Extra)
Specifications:
- CPU: 8-bit
- Total pins: 28
- Programmable pins: 24
- Communication Interface:
- SPI Serial Interface(7,14,15,16 PINS) [Can be used for programming this controller]
- UART Interface(17,18 PINS) [Can be used for programming this controller]
- Two-wire Serial Interface or I2C(14,15 PINS) [Can be used to connect sensors and LCDs]
- ICSP or In-Circuit Serial Programming Interface (27,28 Pins) [Can be used for programming this controller]
- ADC Feature: 11channels of 10-bit resolution
- Timer Feature: One 8-bit counter, Two 16-bit counter
- Analog Comparators: 2
- PWM channels: 4
- External Oscillator: Up to 20MHz
- Internal Oscillator: 31KHz-8MHz Internal R-C Oscillator featured with:
- Factory calibrated to ±1%
- Software selectable frequency range of 8 MHz to 31 kHz
- Software tunable
- Crystal fail detect for critical applications
- Clock mode switching during operation for power savings
- Program memory / Flash memory: 16Kbytes[100000 write/erase cycles]
- CPU Speed: 1MIPS @ 1MHz
- RAM: 368Bytes
- EEPROM: 256Bytes
- Watchdog Timer: Programmable Watchdog Timer with separate on-chip oscillator
- Power Save Modes: Available
- Operating Voltage: 2.0V to 5.5V
- Maximum current to any I/O pin: IN :25mA |Â OUT : 25mA
- Operating Temperature: -40°C to +125°C