Showing 1–18 of 22 results
ATmega 16A-PU PDIP-40 Microcontroller
Specifications :
- Advanced RISC Architecture.
- 32 x 8 General Purpose Working Registers.
- Fully Static Operation.
- Up to 16 MIPS Throughput at 16 MHz.
- Advanced RISC Architecture.
- On-chip 2-cycle Multiplier.
- High Endurance Non-volatile Memory segments.
- 16 Kbytes of In-System Self-programmable Flash program memory.
- 512 Bytes EEPROM.
- 1 Kbyte Internal SRAM.
- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
- Optional Boot Code Section with Independent Lock Bits.
- In-System Programming by On-chip Boot Program.
- True Read-While-Write Operation.
- Programming Lock for Software Security.
- JTAG (IEEE std. 1149.1 Compliant) Interface.
- Boundary-scan Capabilities According to the JTAG Standard.
- Extensive On-chip Debug Support.
- Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface.
- Peripheral Features.
- Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes.
- One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode.
- Real Time Counter with Separate Oscillator.
- Four PWM Channels.
- 8-channel, 10-bit ADC.
- 8 Single-ended Channels.
- 7 Differential Channels in TQFP Package Only.
- 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x.
- Byte-oriented Two-wire Serial Interface.
- Programmable Serial USART.
- Master/Slave SPI Serial Interface.
- Programmable Watchdog Timer with Separate On-chip Oscillator.
ATmega 32A-AU / ATmega32A U-TH (SMD Package) TQFP-44 PIN Microcontroller
Features:
- Advanced RISC architecture
- 131 Powerful instructions
- Fully static operation
- Up to 16MIPS throughput at 16MHz
- On-chip 2-cycle multiplier
- High endurance non-volatile memory segments
- Optional boot code section with independent lock bits
- In-system programming by the on-chip boot program
- True Read-While-Write operation
- Programming lock for software security
Atmega328 U IC Micro-controller
Specifications:
- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general-purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
ATmega328P AU TQFP-32 Microcontroller
ATmega328P U-TH Microcontroller
Atmega328P-U IC Micro-controller
Specifications:
- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general-purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
ATMega32A Microcontroller IC
Features:
- Advanced RISC architecture
- 131 Powerful instructions
- Fully static operation
- Up to 16MIPS throughput at 16MHz
- On-chip 2-cycle multiplier
- High endurance non-volatile memory segments
- Optional boot code section with independent lock bits
- In-system programming by the on-chip boot program
- True Read-While-Write operation
- Programming lock for software security
ATmega8A AU TQFP-32 Microcontroller
Features:
- Advanced RISC architecture – On-chip 2-cycle multiplier
- High endurance, non-volatile memory segments
- QTouch® library support – Capacitive touch buttons, sliders, and wheels
- Peripheral features – Byte-oriented Two-Wire serial interface
- Power-on reset (POR) and programmable brown-out detection
- Internal Calibrated RC oscillator
- External and internal interrupt sources
- Five sleep modes – Idle, ADC noise reduction, power-save, power-down, and standby
ATmega8A U PDIP-28 Microcontroller
Atmel ATMEGA32U4-AUR SMD IC
Specifications:
- Manufacturer : Microchip
- Product Category : 8-bit Microcontrollers - MC
- Mounting Style :Â SMD/SMT
- Package/Case : TQFP-44
- Package/Case:
- Series : ATmega32U4
- Core : AVR
- Data Bus Width : 8 bit
- Maximum Clock Frequency : 16 MHz
- Program Memory Size :Â 32 kB
- Data RAM Size :Â 2.5 kB
- Number of ADC Channels :Â 12
- Number of Timers/Counters :Â 4 Timer
- Interface Type : JTAG, SPI, TWI, USART, USB
- Data RAM Type :Â SRAM
- Data ROM Size : 1 kB
- Data ROM Type :Â EEPROM
- Number of I/Os : 26 I/O
- Processor Series : megaAVR
- Operating Supply Voltage : 2.7 V to 5.5 V
- ADC Resolution : 10 bit
- Minimum Operating Temperature : - 40 C
- Maximum Operating Temperature : + 85 C
- Program Memory Type : Flash
- Unit Weight : 273.300 mg
ATtiny85 IC
IC AT89C51
Specifications:
- The 89c51 is compatible with MCS 51 family.
- It has 8 bit data bus and 8 bit (arithmetic logic unit).
- It has 4k bytes of on chip reprogrammable flash memory.
- It supported three level program memory lock.
- It has 16 bit of address bus and 64 kb of RAM (random access memory) and ROM (read only memory).
- It has on chip RAM 128 bytes data memory.
- It has four 8 bit bidirectional input or output ports that is 32 programmable input or output lines.
- It can execute 1 million one cycle instructions per second with a clock frequency of 12MHz.
- It has one UART programmable serial ports.
- It has six interrupts source.
- It has two multimode 16 bit timers.
- It has two level interrupts priority.
- It has power saving mode.
IC ATMEGA 8A-PU
Specifications:
- Operating Voltage: 4.5V to 5V.
- Advanced RISC Architecture.
- 32 x 8 General Purpose Working Registers.
- Fully Static Operation.
- Up to 16 MIPS Throughput at 16 MHz.
- On-chip 2-cycle Multiplier.
- High Endurance Non-volatile Memory segments.
- 8 Kbytes of In-System Self-programmable Flash program memory.
- 512 Bytes EEPROM.
- 1 Kbyte Internal SRAM.
- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
- Data retention: 20 years at 85°C/100 years at 25°C(1).
- Optional Boot Code Section with Independent Lock Bits.
- In-System Programming by On-chip Boot Program.
- True Read-While-Write Operation.
- Programming Lock for Software Security.
- Extensive On-chip Debug Support.
- 8 Single-ended Channels.
- Byte-oriented Two-wire Serial Interface.
- Programmable Serial USART.
- Master/Slave SPI Serial Interface.
- Programmable Watchdog Timer with Separate On-chip Oscillator.
- Minimal circuit required for a complete functional project.
- Applications of ATmega8 Microcontroller:
- Multiple DIY projects.
- Projects requiring more than logical control for devices.
- Micro-controller applications for multiple device interface/Control.
N76E003AT20 IC-2Pcs
Overview:
The N76E003 provides up to 18 I/O pins under 20 pin package and rich peripherals including two UARTs, SPI, I²C, 6-ch PWM output, wake-up function, and Brown-out detector. The competitive features include a high precision <2% deviation 16 MHz Internal RC oscillator, and a high-resolution 12-bit 8 channel ADC.
PIC 18F4550 IC
Specifications:
- CPU:8-bit
- Total Number of Pins:40
- Operating Voltage:+4.0 to +5.5 V (+5.5V being absolute maximum)
- Number of programmable I/O pins:35
- CPU Speed:12 MIPS
- RAM Bytes:2KBytes
- EEPROM:256Bytes
- Watchdog Timer:Programmable Watchdog Timer with Separate On-chip Oscillator
- External Oscillator:Up to 48MHz
- Internal Oscillator:32KHz-8MHz Calibrated Internal Oscillator
PIC16F877A Micro-controller IC
PIC16F886 Microcontroller IC
Specifications:
- CPU: 8-bit
- Total pins: 28
- Programmable pins: 24
- Communication Interface:
- SPI Serial Interface(7,14,15,16 PINS) [Can be used for programming this controller]
- UART Interface(17,18 PINS) [Can be used for programming this controller]
- Two-wire Serial Interface or I2C(14,15 PINS) [Can be used to connect sensors and LCDs]
- ICSP or In-Circuit Serial Programming Interface (27,28 Pins) [Can be used for programming this controller]
- ADC Feature: 11channels of 10-bit resolution
- Timer Feature: One 8-bit counter, Two 16-bit counter
- Analog Comparators: 2
- PWM channels: 4
- External Oscillator: Up to 20MHz
- Internal Oscillator: 31KHz-8MHz Internal R-C Oscillator featured with:
- Factory calibrated to ±1%
- Software selectable frequency range of 8 MHz to 31 kHz
- Software tunable
- Crystal fail detect for critical applications
- Clock mode switching during operation for power savings
- Program memory / Flash memory: 16Kbytes[100000 write/erase cycles]
- CPU Speed: 1MIPS @ 1MHz
- RAM: 368Bytes
- EEPROM: 256Bytes
- Watchdog Timer: Programmable Watchdog Timer with separate on-chip oscillator
- Power Save Modes: Available
- Operating Voltage: 2.0V to 5.5V
- Maximum current to any I/O pin: IN :25mA |Â OUT : 25mA
- Operating Temperature: -40°C to +125°C