Showing 109–126 of 239 results

Development Board

Sold out

ICSP Programmer Socket – UIC-S

417.72 (Inc. GST)
354.00 (+18% GST Extra)
Features:
  • No external power needed
  • Power Indicator LED on board
  • Fit perfectly with UIC00A and UIC00B
  • Support 18-pin, 28-pin and 40-pin 8-bit PIC micro-controller.
  • Selector to program 18-pin or 28-pin&40-pin PIC
  • Come with 40-pin ZIF socket for ease of plug and unplug of PIC

ICSP Universal Socket

365.80 (Inc. GST)
310.00 (+18% GST Extra)

Overview:

Cytron has created this UIC-A so that users can use any programmer regardless of the development board. For example, a development board that uses PICkit2’s socket standard, which is 6-way header pins can be programmed with UIC000B by using the UIC-A!

IIC/I2C Serial Interface Adapter Module – Compatible with 1602 LCD & 2004 LCD

58.42 (Inc. GST)
49.50 (+18% GST Extra)
Specifications:
  • IC Chip: PCF8574
  • Power Supply: 5V
  • Serial I2C control of LCD display using PCF8574
  • Backlight can be enabled or disabled via a jumper on the board.
  • Contrast control via a potentiometer.
  • Can have 8 modules on a single I2C bus (change address via solder jumpers) address, allowing
  • Size: 41.6 x 19.2 mm
  • Compatible with Arduino Boards, Raspberry pi 

J-link ULINK2 Emulator V8 all-ARM JTAG Adapter Board

189.98 (Inc. GST)
161.00 (+18% GST Extra)
Features : 
  • Material: Silicone
  • Interface: Ethernet
  • Type: Wireless
  • 10PIN JTAG seat support j-link, ULINK2 connection.
    • 20PIN Pitch = 2.54 MM
    • 20PIN Pitch = 2.0 MM
    • 10PIN pitch = 2.54 MM
    • 10PIN pitch = 2.0 MM
    • 14PIn Pitch = 2.54 MM

KQ-330 Power Line Carrier Communication Module

1,711.00 (Inc. GST)
1,450.00 (+18% GST Extra)
Features:
  • Supports Both RS232 and TTL Interface.
  • Universal supply works over a power line voltage range of 85 to 265
  • VAC, 50~60Hz
  • Support QAM 256/64/16, DQPSK,DBPSK and ROBO modulation schemes
  • Up to 85 Mbps data rate on the power line
  • 56-bit DES Link Encryption with key management for security.
  • Low power consumption
  • Operating frequency 120 ~ 135KHZ, interface baud rate 9600bps. The actual baud rate 100bps.

LAN8720 Ethernet Network Module Transceiver RMII Interface Development Board

289.00 (Inc. GST)
244.92 (+18% GST Extra)
Specifications:
  • High-Performance 10/100 Ethernet Physical Layer Transceiver (PHY)
  • Supports single 3.3V supply
  • Supports the reduced pin count RMII interface
  • Supports HP Auto-MDIX
  • Onboard chip package: 24-pin QFN (4×4 mm) Lead-Free RoHS Compliant package
  • Flexible Power Management Architecture
  • Integrated 1.2V regulator
  • I/O voltage range: +1.6V to +3.6V

LC Filter Module 3A 5-30V Built-in Reverse Polarity Protection Reduce the effect of radiated interference for FPV Drone

411.82 (Inc. GST)
349.00 (+18% GST Extra)
Specification:
  • Max 36V Input
  • Maximum Current: 2A
  • Built-in Reverse Polarity Protection
  • Ultra Low Voltage Drop
  • Weight Only 0.5g

LC Power Filter 2A LC Filter Module Clear Transmission FPV Ripple Interference Video Signal Filtering for RC Drone

399.00 (Inc. GST)
338.14 (+18% GST Extra)
Specification:
  • Maximum input voltage: 16V
  • Maximum current: 2A
  • Color: Black
  • Fit for: Remote controlled aircraft, multicopter, quadcopter, airplane, helicopter
  • Fuel source: Electric
  • Model: RTF LC-FILTER
  • Size: length: 3.5cm width: 1.1cm heigth: 1cm
  • Product weight: 14g

MACH3 Interface Board CNC 5 Axis with Optocoupler for Stepper Motor Driver

368.99 (Inc. GST)
312.71 (+18% GST Extra)
Specifications:
  1. Input Power: Through PC USB port or 12-24V power supply
  2. Compatible Stepper Motor Driver: Max 5, 2-phase Microstep controllers
  3. Driver type: Pulse and Direction signal control
  4. Weight (gm): 78
  5. Dimensions (mm) LxWxH: 90 x 70 x 20
  6. Cable Length: 1.4 meter

MAX485 TTL To RS485

28.01 (Inc. GST)
23.73 (+18% GST Extra)

Specifications :

  • Operating voltage: 5V
  • On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
  • A low power consumption for the RS-485 communication
  • Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
  • All pins of the chip have been lead to can be controlled through the microcontroller.
  • Convenient RS-485 communication wiring
  • Multiple Units can be connected to the same RS-485 bus wiring.

MCP23017 16 Bit IO Port Expander Module I2C Interface Arduino Compatible

472.00 (Inc. GST)
400.00 (+18% GST Extra)
Specifications:
  • Operating voltage: 3.0V-5.5V
  • Drive chip: MCP23017
  • Number of IO: 16 (input, output, interruption)
  • Drive power supply: 25mAh
  • 12C frequency: 100KHz, 400KHz, 1.7MHz
  • Working temperature: -40? to 125?
  • Chip level: Industrial grade
  • Parallel multiple: Up to 8
  • Drive Program: 51 and Arduino
  • Size: Approx. 65mm x 19mm

MCP2515 Can Bus Shield Board SPI Interface 9 Pins Standard Sub-D Connector Expansion Module

622.00 (Inc. GST)
527.12 (+18% GST Extra)

Specifications:

  1. SPI Interface up to 10 MHz.
  2. Implements CAN V2.0B at up to 1 Mb/s.
  3. Arduino/ Freaduino Completely compatible.
  4. Industrial standard 9 pin sub-D connector.
  5. Standard (11 bit) and extended (29 bit) data and remote frames

MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino

Original price was: ₹165.20.Current price is: ₹159.00. (Inc. GST)
134.74 (+18% GST Extra)

Specifications :

  • Input Supply voltage: 5V
  • Input Supply Current: 5 mA
  • Communication Rate: 1 Mbps
  • Support CAN V2.0B technical standard, communication rate 1Mb / S.
  • 0 to 8 bytes long data field.
  • Use High-speed CAN transceiver TJA1050
  • SPI control for expanding Multi CAN bus interface
  • Use serial port could view the communication data
  • With the independent key, LED indicator, Power indicator
  • With power pin
  • Positioning screw hole center spacing 23 mm x 38 mm
  • The working current: typical 5mA, standby current 1 microamp. Except for the power indicator.

MCU-2317 MCP23017 16-BIT I/O EXPANDER SERIAL I2C INTERFACE MODULE

499.00 (Inc. GST)
422.88 (+18% GST Extra)

Specifications:

  1. 16 Bit Bidirectional I/O Port.
  2. Configurable Interrupt Output Pins
  3. Configurable Interrupt Source.
  4. High-Speed I2C Bus Compatible.
  5. External Reset Input.
  6. Low Standby Current

MiNi ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC

549.88 (Inc. GST)
466.00 (+18% GST Extra)
  1. Fully Compatible with 10/100/1000Base-T Networks
  2. Integrated MAC and 10Base-T PHY
  3. Supports One 10Base-T Port with Automatic Polarity Detection and Correction
  4. Supports Full and Half-Duplex modes
  5. Programmable Automatic Retransmit on Collision
  6. Programmable Automatic Rejection of Erroneous Packets
  7. SPI Interface with Clock Speeds Up to 20 MHz
  8. For Arduino, SPI, AVR, PIC, LPC, STM32.

Mini HDMI2VGA UP Scaler 1080P HD Video Converter Media Streaming Device

389.40 (Inc. GST)
330.00 (+18% GST Extra)
Specifications:
  • High-Quality HDMI Adaptor
  • Colour: White
  • Input HDMI.
  • Output: VGA.

Mini Tesla Coil 15W Plasma Speaker Tesla Kit Music Wireless Transmission Board Module DC 15-24V Plasma Stereo Speaker (All Soldered)

342.20 (Inc. GST)
290.00 (+18% GST Extra)
Specification:
  • PCB size: 4* 8mm
  • Power: 15W
  • Power input: DC 15-24v. The current is 2A. DC5.5 interface/pin
  • Audio input: 3.5 sockets, can be connected to the mobile phone, MP3, computer audio
  • Material: Synthetic Cardboard

Mini USBISP USBASP Programmer Aluminum for 51 single chip AVR WIN7 64

454.30 (Inc. GST)
385.00 (+18% GST Extra)

Specifications:

  • USBASP Board
  • Mini size, with cover
  • Support USB 1.0 or 2.0 interface
  • Support S51 and the AVR chip programmer. fast and stable
  • Standard IDC 10PIN interface
  • Support software: AVR_FIGHTER, Progisp1.72