Showing 1–9 of 79 results
Arduino is an open-source hardware and software. Many development boards and shields of Arduino available. Easy to use & build project even if you are first time user.
Filter by price
Arduino
1.44 inch TFT LCD Color Screen Module SPI Interface
₹354.00 (Inc. GST)₹300.00 (+18% GST Extra)
Specifications:
- Display Size: 1.44″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 128
- PCB Size (mm): 44×30 (LxW)
- Interface Type: SPI
1.8 Inch TFT LCD Module 128 x 160 -4 IO SPI with Touch
₹531.00 (Inc. GST)₹450.00 (+18% GST Extra)
Specifications:
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- PCB Size (mm): 62×38 (LxW)
- Interface Type: SPI with Touch
1.8 Inch TFT LCD Module 128 x 160 with 4 IO SPI
₹315.00 (+18% GST Extra)
Specifications:
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- PCB Size (mm): 62×38 (LxW)
- Interface Type: SPI
1602 LCD Keyboard Arduino Shield
₹218.30 (Inc. GST)₹185.00 (+18% GST Extra)
Specifications:
- PCB size: 82.8mm X 56.6mm X 1.6mm
- Power supply: 5V DC
Pin | Function |
A0 | Button(select, up, right, down and left) |
D4 | DB4 |
D5 | DB5 |
D6 | DB6 |
D7 | DB7 |
D8 | RS(Data or signal display selection) |
D9 | LCD1602 Enable |
D10 | Backlight control |
2.4 Inch TFT Touch Screen Module for UNO R3 Blue
₹808.99 (Inc. GST)₹685.59 (+18% GST Extra)
Specifications:
- Touch screen, with the function of handwriting input
- Screen colour: 65 k
- Touch Type: Resistive
- Single 3.3 V power supply
- Â 16-bit parallel data interface.
2.4 inch Touch TFT LCD Arduino Shield With Pen
₹564.99 (Inc. GST)₹478.81 (+18% GST Extra)
Specifications:
-
- 2.4″ diagonal Touch LCD TFT display
- 240×320 resolution, 18-bit (262,000) color
- 8-bit digital interface, plus 4 control lines
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3, and analog 4 and 5. Pin 12 is available if not using the microSD
- Works with any Arduino UNO
- 5V compatible! Use with 3.3V or 5V logic
- 4 white LED backlights. By default but you can connect the transistor to a digital pin for backlight control
- Onboard 3.3V 300mA LDO regulator
2.8 Inch ILI9341 TFT Full-color Touch Screen Module 320×240 Support UNO MEGA2560
₹1,331.04 (Inc. GST)₹1,128.00 (+18% GST Extra)
- 2.8″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 240×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
3.5″ inch ILI9486 TFT Touch Shield LCD Module 480×320 for Arduino Uno
₹1,049.99 (Inc. GST)₹889.83 (+18% GST Extra)
Specifications:
- 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
5V 4 Channel Relay Shield for UNO R3 Relay Shield Four Channel Relay Shield
₹349.00 (Inc. GST)₹295.76 (+18% GST Extra)
Specifications :
- Coil Voltage : 5.0 volts
- Connector Type : Screw
- Contact Type : Normally Open , Normally Closed
- Operating Voltage : 5.0 volts