Showing 1–24 of 79 results
Arduino is an open-source hardware and software. Many development boards and shields of Arduino available. Easy to use & build project even if you are first time user.
1.44 inch TFT LCD Color Screen Module SPI Interface
₹354.00 (Inc. GST)₹300.00 (+18% GST Extra)
Specifications:
- Display Size: 1.44″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 128
- PCB Size (mm): 44×30 (LxW)
- Interface Type: SPI
1.8 Inch TFT LCD Module 128 x 160 -4 IO SPI with Touch
₹531.00 (Inc. GST)₹450.00 (+18% GST Extra)
Specifications:
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- PCB Size (mm): 62×38 (LxW)
- Interface Type: SPI with Touch
1.8 Inch TFT LCD Module 128 x 160 with 4 IO SPI
Original price was: ₹413.00.₹371.70Current price is: ₹371.70. (Inc. GST)₹315.00 (+18% GST Extra)
Specifications:
- Display Size: 1.8″
- Driver IC: ST7735
- Input Voltage (V): 3.3 to 5
- Pixel Resolution: 128 x 160
- PCB Size (mm): 62×38 (LxW)
- Interface Type: SPI
1602 LCD Keyboard Arduino Shield
₹218.30 (Inc. GST)₹185.00 (+18% GST Extra)
Specifications:
- PCB size: 82.8mm X 56.6mm X 1.6mm
- Power supply: 5V DC
| Pin | Function |
| A0 | Button(select, up, right, down and left) |
| D4 | DB4 |
| D5 | DB5 |
| D6 | DB6 |
| D7 | DB7 |
| D8 | RS(Data or signal display selection) |
| D9 | LCD1602 Enable |
| D10 | Backlight control |
2.4 Inch TFT Touch Screen Module for UNO R3 Blue
₹808.99 (Inc. GST)₹685.59 (+18% GST Extra)
Specifications:
- Touch screen, with the function of handwriting input
- Screen colour: 65 k
- Touch Type: Resistive
- Single 3.3 V power supply
- Â 16-bit parallel data interface.
2.4 inch Touch TFT LCD Arduino Shield With Pen
₹564.99 (Inc. GST)₹478.81 (+18% GST Extra)
Specifications:
-
- 2.4″ diagonal Touch LCD TFT display
- 240×320 resolution, 18-bit (262,000) color
- 8-bit digital interface, plus 4 control lines
- Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3, and analog 4 and 5. Pin 12 is available if not using the microSD
- Works with any Arduino UNO
- 5V compatible! Use with 3.3V or 5V logic
- 4 white LED backlights. By default but you can connect the transistor to a digital pin for backlight control
- Onboard 3.3V 300mA LDO regulator
2.8 Inch ILI9341 TFT Full-color Touch Screen Module 320×240 Support UNO MEGA2560
₹1,331.04 (Inc. GST)₹1,128.00 (+18% GST Extra)
- 2.8″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 240×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
3.5″ inch ILI9486 TFT Touch Shield LCD Module 480×320 for Arduino Uno
₹1,049.99 (Inc. GST)₹889.83 (+18% GST Extra)
Specifications:
- 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines
5V 4 Channel Relay Shield for UNO R3 Relay Shield Four Channel Relay Shield
₹349.00 (Inc. GST)₹295.76 (+18% GST Extra)
Specifications :
- Coil Voltage : 5.0 volts
- Connector Type : Screw
- Contact Type : Normally Open , Normally Closed
- Operating Voltage : 5.0 volts
Acrylic Case for Arduino Mega
₹148.68 (Inc. GST)₹126.00 (+18% GST Extra)
Features
- Protective case of Mega 2560.
- Color: Transparent.
- Fastened by eight screws.
- Made by high grade acrylic.
- Provides excellent protection, with fashion appearance.
- Unique design for Mega 2560 with pin leakage, which provides easy connection to other components.
ARDUINO LELY PAD BIG ATMEGA328P
₹599.01 (Inc. GST)₹507.63 (+18% GST Extra)
Features
- Microcontroller : ATmega168V or ATmega328V
- Operating Voltage 2.7-5.5 V
- Input Voltage 2.7-5.5 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 6
- DC Current per I/O Pin 40 mA
- Flash Memory 16 KB (of which 2 KB used by bootloader)
- SRAM 1 KB
EEPROM 512 bytes Clock Speed 8 MHz
Arduino Mega ATMEGA2560 16U
₹1,449.04 (Inc. GST)₹1,228.00 (+18% GST Extra)
Features
- Microcontroller : ATmega2560
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Input Voltage (limit) : 6-20V
- Digital I/O Pins : 54 (of which 15 provide PWM output)
- Analog Input Pins : 16
- DC Current per I/O Pin : 20 mA
- DC Current for 3.3V Pin : 50 mA
- Flash Memory : 256 KB of which 8 KB used by bootloader
- SRAM : 8 KB
- EEPROM : 4 KB
- Clock Speed : 16 MHz
- LED BUILTIN : 13
Arduino Micro- iRobotics
₹531.00 (Inc. GST)₹450.00 (+18% GST Extra)
Specifications:
- PCB Name : Arduino Micro
- Layer : Single Layer
- PCB Material: Glass  Epoxy
- Fire Retardant
- Weight: 20 g.
ARDUINO NANO 33 BLE Board (Without Header)
₹2,760.00 (Inc. GST)₹2,338.98 (+18% GST Extra)
Specifications:
- Model Type : ARDUINO NANO 33 BLE
- Microcontroller Chip : SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Operating Voltage (VDC) : 3.3V
- Analog I/O Pins : Input Pins 8 : (ADC 8/10/12 bit)
Output Pins : 1 (DAC 10 bit) - Digital I/O Pins : 14
- PWM Digital I/O Pins : 11
- Clock Speed : 48MHz
- Flash Memory : 256 KB
- SRAM (KB) : 32
- EEPROM : None
- DC Current for 3.3V Pin (mA) : 7
- Power Supply Option : Micro USB
- On Board LEDs : On/Off, L (PIN 13), TX, RX
- Operating Temperature (°C) : -10 to 55
- Weight (gm) : 5
Arduino Nano R3 with CH340 Chip (Without Soldered)
₹254.88 (Inc. GST)₹216.00 (+18% GST Extra)
Features
- Microcontroller ATmega328
- Architecture AVR
- Operating Voltage : 5 V
- Flash Memory : 32 KB of which 2 KB used by bootloader
- SRAM : 2 KB
- Clock Speed : 16 MHz
- Analog IN Pins : 8
- EEPROM : 1 KB
- DC Current per I/O Pins : 40 mA (I/O Pins)
- Input Voltage : 7-12 V
- Digital I/O Pins : 22 (6 of which are PWM)
- PWM Output : 6
- Power Consumption : 19 mA
- PCB Size : 18 x 45 mm
- Weight : 7 g
- Input Port : USB Mini
Arduino Sensor Shield V5 Expansion Board
₹88.50 (Inc. GST)₹75.00 (+18% GST Extra)
Quick Overview:
- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless rf modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
- Compatible With Arduino UnoÂ
Arduino UNO Case Acrylic
₹70.80 (Inc. GST)₹60.00 (+18% GST Extra)
Specifications:
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
- Simply Clicks Together Enclosure.
- Dimensions : 79.5 x 64.5 x 21 mm.
- Material: A grade acrylic sheet.
- For Arduino UNO R3 Development Board only.
- With screw copper pillar and installation instructions.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
Arduino UNO R3 (With Logo)
₹572.30 (Inc. GST)₹485.00 (+18% GST Extra)
Specifications:
- Microcontroller: ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) : 6-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by the bootloader
- SRAM: 2 KB (ATmega328)
- EEPROM: 1 KB (ATmega328)
- Clock Speed: 16 MHz
ATmega328P 5V Nano V3.0 Development Board 16MHz CH340 Type-C
₹230.10 (Inc. GST)₹195.00 (+18% GST Extra)
- Product: Arduino NANO
- Model: Nano V3.0 CH340
- Processor: ATmega328
- Operating Voltage: 5V
- Best for your electronic projects
- Tiny size makes it perfect for compact projects.
ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
₹1,271.00 (Inc. GST)₹1,077.12 (+18% GST Extra)
Specification :
- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
ATTINY85 USB Development Board
₹312.70 (Inc. GST)₹265.00 (+18% GST Extra)
Specification:
- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
- Power via USB or External Source or 7-16 v to 5 v (automatic selection).
- The Onboard, 150 ma 5 v Regulator.
- Built-in USB and serial were debugging).
- 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
- 8 k Flash Memory (about 6 k after bootloader).
- The I2C and SPI (vis USI).
- The Power LED and the Test/Status LEDs.
BPiDuino UNO Board Module (To make BANANA PI compatible with Arduino UNO)
₹849.60 (Inc. GST)₹720.00 (+18% GST Extra)
Specifications:
- ATmega328 chip on the module
- Compatible with for Arduino Uno
- Switch 5V or 3.3V GPIO
- Compatible with Processing code
- Expand SPI of Banana Pi
- Working voltage: 3.3V-4.5V
- GPIO voltage: 3.3V or 5.5
- 8 channel 10bit high-resolution ADC
CNC Shield V3 Arduino Uno Mega Compatible
₹121.54 (Inc. GST)₹103.00 (+18% GST Extra)
Specifications:
- Interfaces with Arduino Uno.
- 4 stepper motor driver outputs, 3 Axis + 1 Slave.
- Compatible with Pololu A4988 and DRV8825 stepper drivers and others.
- 6 Limit switch inputs.
- I2C and UART outputs.
- Additional connections available for Spindle Control, Stop/Start & Emergency Buttons.
- Fully tested after assembly.
CNC Shield V4.0 3-Axis Stepper Motor Drive Board
₹188.80 (Inc. GST)₹160.00 (+18% GST Extra)
Features :
- 3 Axis stepper motor driver.
- Compatible with a micro-drive laser engraving machine, three-axis CNC engraving machine.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible.
- Worked with Arduino nano.