Showing 19–31 of 31 results
Original Arduino Nano
Specification:
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Original Arduino Nano 33 IOT
Original Arduino Uno R3
Specifications:
- Microcontroller: ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) : 6-12V
- Digital I/O Pins : 14 (of which 6 provide PWM output)
- Analog Input Pins : 6
- DC Current per I/O Pin : 40 mA
- DC Current for : 3.3V Pin 50 mA
- Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM : 2 KB (ATmega328)
- EEPROM : 1 KB (ATmega328)
- Clock Speed : 16 MHz
Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino
Pro Micro With The Bootloader ATmega32U4 5V/16MHz Module Controller Mega32U4 Leonardo For Arduino Micro USB Port
Pro Micro With The Bootloader ATmega32U4 5V/16MHz Module Controller Mega32U4 Leonardo For Arduino Micro USB Type-C Port
Specification:
- ATMega 32U4
- operating at 5V/16MHz
- Operating Voltage (logic level): 5V
- Supported under Arduino IDE v1.0.1
- Micro USB Type-C Port
- Onboard micro USB connector for programming
- 4 x 10-bit ADC pins
- 12 x Digital I/Os (5 are PWM capable)
- Serial connections for Rx and Tx devices
- 1 pair of TTL level serial transceiver ports RX / TX
- There is a bootloader installed in it
Pro Mini ATMEGA328P 3.3V/8M (Official Version)
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
UNO Based ESP8266 Nodemcu Development Board
Specifications:
- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
Uno R3 CH340G ATMega328P Development Board Compatible with Arduino
Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB-TTL CH340G Compatible for Arduino UNO
Specifications:
- Microcontroller: ATmega328IC
- Wi-Fi: ESP8266
- USB-TTL converter: CH340G
- Power Output: 5V-800mA
- Power input USB: 5V (500mA max.)
- Power input VIN/DC Jack: 9-24V
- Power Consumption: 5V 800mA
- Logic Level: 5V
- WiFi: 802.11 b/g/n 2.4 GHz
- USB type: Micro USB
- USB Clock Frequency: 16 MHz
- Operating Supply Voltage: 5V
- Digital I/O Pins: 14
- Analog I/ O Pins: 6
- Memory Size: 32 Mb
- Interface Type: serial
- Operating temperature: −40С°/+125С°
Wemos ESP32 WIFI Bluetooth UNO D1 R32 4MB Flash Micro USB Development Board
Wemos TTGO Xi 8F328P-U Board For Arduino Nano V3.0 Promini
Specifications:
- It comes with USB and is more convenient to use.
- The 8F328D can be powered by 3V3 and 5V, operating at 16M frequencies with excellent levels of compatibility.
- Built-in high precision RC, without external crystal oscillator, can be stable operation.
- Less peripheral parts, simple circuit design.
- 12 bit ADC (analog to digital conversion)
- Bring DAC
- Own GUID (unique ID) can be used for chip program encryption
- Comes with an internal 1.024V/2.048V/4.096V + 1% calibration reference voltage source.