Showing 1–9 of 31 results
ARDUINO LELY PAD BIG ATMEGA328P
Features
- Microcontroller : ATmega168V or ATmega328V
- Operating Voltage 2.7-5.5 V
- Input Voltage 2.7-5.5 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 6
- DC Current per I/O Pin 40 mA
- Flash Memory 16 KB (of which 2 KB used by bootloader)
- SRAM 1 KB EEPROM 512 bytes Clock Speed 8 MHz
Arduino Mega ATMEGA2560 16U
Features
- Microcontroller : ATmega2560
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Input Voltage (limit) : 6-20V
- Digital I/O Pins : 54 (of which 15 provide PWM output)
- Analog Input Pins : 16
- DC Current per I/O Pin : 20 mA
- DC Current for 3.3V Pin : 50 mA
- Flash Memory : 256 KB of which 8 KB used by bootloader
- SRAM : 8 KB
- EEPROM : 4 KB
- Clock Speed : 16 MHz
- LED BUILTIN : 13
Arduino Micro- iRobotics
ARDUINO NANO 33 BLE Board (Without Header)
Specifications:
- Model Type : ARDUINO NANO 33 BLE
- Microcontroller Chip : SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Operating Voltage (VDC) : 3.3V
- Analog I/O Pins : Input Pins 8 : (ADC 8/10/12 bit) Output Pins : 1 (DAC 10 bit)
- Digital I/O Pins : 14
- PWM Digital I/O Pins : 11
- Clock Speed : 48MHz
- Flash Memory : 256 KB
- SRAM (KB) : 32
- EEPROM : None
- DC Current for 3.3V Pin (mA) : 7
- Power Supply Option : Micro USB
- On Board LEDs : On/Off, L (PIN 13), TX, RX
- Operating Temperature (°C) : -10 to 55
- Weight (gm) : 5
Arduino Nano R3 with CH340 Chip (Without Soldered)
Features
- Microcontroller ATmega328
- Architecture AVR
- Operating Voltage : 5 V
- Flash Memory : 32 KB of which 2 KB used by bootloader
- SRAM : 2 KB
- Clock Speed : 16 MHz
- Analog IN Pins : 8
- EEPROM : 1 KB
- DC Current per I/O Pins : 40 mA (I/O Pins)
- Input Voltage : 7-12 V
- Digital I/O Pins : 22 (6 of which are PWM)
- PWM Output : 6
- Power Consumption : 19 mA
- PCB Size : 18 x 45 mm
- Weight : 7 g
- Input Port : USB Mini
Arduino UNO R3 (With Logo)
Specifications:
- Microcontroller: ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) : 6-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by the bootloader
- SRAM: 2 KB (ATmega328)
- EEPROM: 1 KB (ATmega328)
- Clock Speed: 16 MHz
ATmega328P 5V Nano V3.0 Development Board 16MHz CH340 Type-C
ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
ATTINY85 USB Development Board
Specification:
- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
- Power via USB or External Source or 7-16 v to 5 v (automatic selection).
- The Onboard, 150 ma 5 v Regulator.
- Built-in USB and serial were debugging).
- 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
- 8 k Flash Memory (about 6 k after bootloader).
- The I2C and SPI (vis USI).
- The Power LED and the Test/Status LEDs.