Showing 1–24 of 31 results
- View cart You cannot add that amount to the cart — we have 1 in stock and you already have 1 in your cart.
ARDUINO LELY PAD BIG ATMEGA328P
Features
- Microcontroller : ATmega168V or ATmega328V
- Operating Voltage 2.7-5.5 V
- Input Voltage 2.7-5.5 V
- Digital I/O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins 6
- DC Current per I/O Pin 40 mA
- Flash Memory 16 KB (of which 2 KB used by bootloader)
- SRAM 1 KB EEPROM 512 bytes Clock Speed 8 MHz
Arduino Mega ATMEGA2560 16U
Features
- Microcontroller : ATmega2560
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Input Voltage (limit) : 6-20V
- Digital I/O Pins : 54 (of which 15 provide PWM output)
- Analog Input Pins : 16
- DC Current per I/O Pin : 20 mA
- DC Current for 3.3V Pin : 50 mA
- Flash Memory : 256 KB of which 8 KB used by bootloader
- SRAM : 8 KB
- EEPROM : 4 KB
- Clock Speed : 16 MHz
- LED BUILTIN : 13
Arduino Micro- iRobotics
ARDUINO NANO 33 BLE Board (Without Header)
Specifications:
- Model Type : ARDUINO NANO 33 BLE
- Microcontroller Chip : SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Operating Voltage (VDC) : 3.3V
- Analog I/O Pins : Input Pins 8 : (ADC 8/10/12 bit) Output Pins : 1 (DAC 10 bit)
- Digital I/O Pins : 14
- PWM Digital I/O Pins : 11
- Clock Speed : 48MHz
- Flash Memory : 256 KB
- SRAM (KB) : 32
- EEPROM : None
- DC Current for 3.3V Pin (mA) : 7
- Power Supply Option : Micro USB
- On Board LEDs : On/Off, L (PIN 13), TX, RX
- Operating Temperature (°C) : -10 to 55
- Weight (gm) : 5
Arduino Nano R3 with CH340 Chip (Without Soldered)
Features
- Microcontroller ATmega328
- Architecture AVR
- Operating Voltage : 5 V
- Flash Memory : 32 KB of which 2 KB used by bootloader
- SRAM : 2 KB
- Clock Speed : 16 MHz
- Analog IN Pins : 8
- EEPROM : 1 KB
- DC Current per I/O Pins : 40 mA (I/O Pins)
- Input Voltage : 7-12 V
- Digital I/O Pins : 22 (6 of which are PWM)
- PWM Output : 6
- Power Consumption : 19 mA
- PCB Size : 18 x 45 mm
- Weight : 7 g
- Input Port : USB Mini
Arduino UNO R3 (With Logo)
Specifications:
- Microcontroller: ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) : 6-12V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by the bootloader
- SRAM: 2 KB (ATmega328)
- EEPROM: 1 KB (ATmega328)
- Clock Speed: 16 MHz
ATmega328P 5V Nano V3.0 Development Board 16MHz CH340 Type-C
ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
ATTINY85 USB Development Board
Specification:
- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
- Power via USB or External Source or 7-16 v to 5 v (automatic selection).
- The Onboard, 150 ma 5 v Regulator.
- Built-in USB and serial were debugging).
- 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
- 8 k Flash Memory (about 6 k after bootloader).
- The I2C and SPI (vis USI).
- The Power LED and the Test/Status LEDs.
BPiDuino UNO Board Module (To make BANANA PI compatible with Arduino UNO)
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino
Specifications:
- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
ESPLORA Joystick Photosensitive Sensor Board Compatible with Arduino (Supports LCD)
Leonardo R3 Board Micro-USB compatible with Arduino
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
Specifications:
- Microcontroller:ATmega2560
- IC Wi-Fi : ESP8266
- USB-TTL converter: CH340G
- Power Out: 5V-800mA
- Power Input USB: 5V (500mA max.)
- Power Input VIN/DC Jack: 9-24V
- Power Consumption: 5V 800mA
- Logic Level: 5V
- Wi-Fi 802.11 b/g/n 2.4 GHz
- USB: Micro USB
- Clock Frequency: 16MHz
- Operating Supply Voltage: 5V
- Digital I/O: 54
- Analog I/O: 16
- Memory Size: 256kb
- Data RAM Type/Size: 8Kb
- Data ROM Type/Size: 4Kb
- Interface Type : SerialOTA
- Operating temperature :−40С°/+125С°
- Dimensions:53.361×101.86mm
- Buil-inexternal antenna
Mega2560 Pro ATMEGA2560-16AU USB CH340G Development Board
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
Specifications:
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Original Arduino Mega 2560 ATmega2560 MCU Rev3
Original Arduino MKR Wi-fi 1010 Board
Original Arduino Nano
Specification:
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Original Arduino Nano 33 IOT
Original Arduino Uno R3
Specifications:
- Microcontroller: ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) : 6-12V
- Digital I/O Pins : 14 (of which 6 provide PWM output)
- Analog Input Pins : 6
- DC Current per I/O Pin : 40 mA
- DC Current for : 3.3V Pin 50 mA
- Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM : 2 KB (ATmega328)
- EEPROM : 1 KB (ATmega328)
- Clock Speed : 16 MHz
Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino
Pro Micro With The Bootloader ATmega32U4 5V/16MHz Module Controller Mega32U4 Leonardo For Arduino Micro USB Port
Pro Micro With The Bootloader ATmega32U4 5V/16MHz Module Controller Mega32U4 Leonardo For Arduino Micro USB Type-C Port
Specification:
- ATMega 32U4
- operating at 5V/16MHz
- Operating Voltage (logic level): 5V
- Supported under Arduino IDE v1.0.1
- Micro USB Type-C Port
- Onboard micro USB connector for programming
- 4 x 10-bit ADC pins
- 12 x Digital I/Os (5 are PWM capable)
- Serial connections for Rx and Tx devices
- 1 pair of TTL level serial transceiver ports RX / TX
- There is a bootloader installed in it