Showing 307–318 of 318 results
Filter by price
Search results: “DC motors” – Page 18
60 RPM L Type BO Motor
₹82.98 (Inc. GST)₹70.32 (+18% GST Extra)
Specifications:
- Operating Voltage 3V – 12V DC
- RPM Approximately 60 RPM
- Output Torque 3.5 kg.cm
- No-load current 40 – 80 mA
- Single Shaft Plastic Gear Motor – BO series L Shape
12V 60 RPM Rectangular Gearbox Motor
₹979.40 (Inc. GST)₹830.00 (+18% GST Extra)
Specifications:
- Base Motor RPM: 6000
- Rated Voltage: 12 V
- Rated Torque: 16 kg-cm
- Stall Torque: 42.5 kg-cm
- Gear Box Motor’s shaft : D-type shaft
12V 30 RPM Rectangular Gearbox Motor
₹977.70 (Inc. GST)₹828.56 (+18% GST Extra)
Specifications:
- Rated current (mA): ≤2000.
- Rated power (W): 5.624.
- Rated Torque (N-cm): 19.83
- Rated speed: 30 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 4500.
12V 4 Channel Relay Module (with Optocoupler)
₹154.58 (Inc. GST)₹131.00 (+18% GST Extra)
Features :
- This Board can be used to Control Solenoids, Motors, Lamps, etc,
- Input Logic: 12v level from MUC
- Indication LEDs for relay output status.• 12V 4-Channel relay board controlled directly by micro-controller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) need 50-60mA driver current
- Input IN1, IN2, IN3, IN4 signal line active low, 4-channel relay output module, relay output contact is maximum 250A 10A
- Input Pin connected to Burg stick. High-current, AC250V 10A, DC30V 10A.
300 RPM Straight Single Shaft BO Motor
₹82.98 (Inc. GST)₹70.32 (+18% GST Extra)
Specifications:
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 300 RPM
- Rated Torque: 0.35 Kg
APM 2.8 Flight Controller with Built in Compass
₹6,643.40 (Inc. GST)₹5,630.00 (+18% GST Extra)
Specifications :
- Straight Needle
- Arduino Compatible!
- Onboard 4 MegaByte Dataflash chip for automatic data logging.
- Optional off-board GPS, a uBlox LEA-6H module with Compass.
- One of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000.
- Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
- Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.
300 RPM L Type BO Motor
₹82.98 (Inc. GST)₹70.32 (+18% GST Extra)
Specifications:
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 300 RPM
- Rated Torque: 0.35 Kgcm
60 RPM I Type BO Motor Single Side Shaft
₹82.98 (Inc. GST)₹70.32 (+18% GST Extra)
Specifications:
- I type BO motor
- Single Shaft
- Speed: 60 RPM
- Used in robotic applications
- Operating Voltage: 3V to 12V DC
- Colour: Yellow
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Torque: 1 Kg cm
10×2 6mm Width Pulley Wheel
₹69.62 (Inc. GST)₹59.00 (+18% GST Extra)
Specification:
- Diameter of pulley : 10 cm
- Width of pulley : 2 cm
- Diameter of shaft hole : 6 mm
10×4 6mm Wheel
₹112.10 (Inc. GST)₹95.00 (+18% GST Extra)
- Diameter – 10 CM
- Width of wheel – 4 CM
- Shaft bore – 6 MM
- Screw Provided to tight wheel with motor shaft.
Dummy Wheels
₹35.40 (Inc. GST)₹30.00 (+18% GST Extra)
Specifications :
- Material: Good Quality Plastic.
- 6mm Shaft Diameter
- 2 screw Hole for fixing on cabinet
- Nut for Fixing with Cabinet
- Shaft with 3mm Hole for wheel tightening
Arduino Mega ATMEGA2560 16U
₹1,449.04 (Inc. GST)₹1,228.00 (+18% GST Extra)
Features
- Microcontroller : ATmega2560
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Input Voltage (limit) : 6-20V
- Digital I/O Pins : 54 (of which 15 provide PWM output)
- Analog Input Pins : 16
- DC Current per I/O Pin : 20 mA
- DC Current for 3.3V Pin : 50 mA
- Flash Memory : 256 KB of which 8 KB used by bootloader
- SRAM : 8 KB
- EEPROM : 4 KB
- Clock Speed : 16 MHz
- LED BUILTIN : 13