Showing 313–323 of 323 results
4.3inch 800×480 IPS Industrial HMI UART LCD Display Capacitive Touch
DWIN 3.5 inch 480 x 320 Resolution HMI UART Serial, Capacitive Touch Smart Screen
Specifications:
- Operating Voltages:5V typical.(MIN:4.5V,MAX:5.5V)
- Integrated smart screen
- Brightness 300nit
- 16.7M colors
- FLASH Memory 16Mbytes
- RAM Memory:128Kbytes
- Powerful data management
- Built-in DGUS II intelligent software
- Active Area (AA):49.0mm (W) ×73.4mm (H)
- Dimensions:103.3(W) mm× 61.1(H)mm × 12.3(T)mm
- Capacitive touch panel, Built-in Buzzer, WIFI_10 module
- UI Version: TA / DGUS II ( DGUS II pre-installed)
- DMG48320C035_03WTC
DWIN 7 inch 800*480 Resolution HMI UART Serial, Capacitive Touch Smart Screen DMG80480C70-03WTC
Specifications:
- Operating Voltages:5V typical.(MIN:4.5V,MAX:5.5V)
- Integrated smart screen
- Brightness 270nit
- 16.7M colors
- FLASH Memory 16Mbytes
- RAM Memory:128Kbytes
- Powerful data management
- Built-in DGUS II intelligent software
- Active Area (AA):154.1mm (W) ×85.9mm (H)
- Dimensions:190.5(W) × 105.4(H) × 13.4(T) mm
- Capacitive touch panel, Built-in Buzzer, WIFI_10 module
- UI Version: TA / DGUS II ( DGUS II pre-installed)
Impact Switch Collision Switch Sensor Module for Arduino
TTP223B Capacitive Single Touch Sensor Module
Sliding Adjustable Potentiometer Module 10k
Bluetooth Transceiver Module Base For HC-05
Features:
- Works with any USB Bluetooth adapters.
- Easy to use and completely encapsulated.
- This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.
- The Bluetooth Module Baseboard can be compatible with the master mode, slave mode and both master-slave mode.
- Works for Bluetooth TTL transceiver module which allows your target device to both send and receive the TTL data.
- The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.
- This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V.
R307S Fingerprint Module
Specifications:
- Supply voltage: DC 4.2 ~ 6.0V
- Working current: 50mA (typical)
- Peak current: 80mA
- Fingerprint image input time: <0.3 seconds
- Window area: 14x18 mm
- Matching mode:1: 1 and 1:N
- Characteristic file size: 256 bytes
- Template size: 512 bytes
- Storage capacity: 1000 pieces
- Security Level: 5 (from low to high: 1,2,3,4,5)
- Fake rate (FAR): <0.001%
- Refusal rate (FRR): <1.0%
- Search time: <1.0 seconds (1: 1000 hours, mean value)
- Host interface: UART USB1.1
- Baud rate (UART): (9600xN) bps Where N = 1 ~ 12 (default N = 6, ie 57600bps)
- Compatible with Raspberry Pi, ArduinoÂ
HX711 Module for Load Cell
MQ-8 Module (Hydrogen Gas Sensor)
Specifications:
- Power supply needs: 5V
- Interface type: Analog, Digital
- High sensitivity to Hydrogen (H2)
- Small sensitivity to alcohol, LPG,cooking fumes
- Stable and long life
- Size: 32x20mm
- Circuit voltage: 5V±0.1
- Heating voltage: 5V±0.1
- Load resistance: 10KΩ
- Heater resistance: 31±5%
- Heating consumption: less than800mW
- Using Temperature: -10°C-50°C
- Storage Temperature: -20°C-70°C
- Related humidity: less than 95%Rh
- Oxygen concentration: 21%(standard condition)Oxygen concentration can affect sensitivity
