Showing 145–156 of 217 results

Search results: “jumper ” – Page 13

ESP-01 Adapter 3.3V 5V Board

57.82 (Inc. GST)
49.00 (+18% GST Extra)

Specifications:

  • The on-board level shift circuit
  • Arduino UNO R3 and the compatible board can directly connect to this module;
  • Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
  • Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
  • Working current: 240mA(MAX).

ESP8266 Adapter Plate Serial Wireless WIFI Module-1pcs

28.01 (Inc. GST)
23.73 (+18% GST Extra)

Features :

  • It features reserved land-pattern for the 3.3V regulator
  • It has Pinouts on the top layer in black color.
  • Compatible with Latest ESP-12F ESP8266 Wifi Module
  • It includes a 10K pull-up resistor populated on PCB.

1uf 63V Capacitors Electrolytic (5 pieces)

17.70 (Inc. GST)
15.00 (+18% GST Extra)
Specifications:
  • Value: 1uF
  • Rated Voltage: 63V
  • Series: SA
  • Reference Standard: IS : 4317 / IEC 384 – 4
  • Type: Radial
  • Tolerance: 20%
  • Size: 5x11mm (DxL)
  • Temperature: -40°C to +85°C

8 WAY DIP SWITCH

17.70 (Inc. GST)
15.00 (+18% GST Extra)
Specifications:
  • Voltage(V): 30V DC
  • Current(A): 0.15
  • of Pins: 8
  • Pin Spacing: 2.54 mm
  • Mounting Type: Through Hole
  • Operating Temperature Range: -40 ~ +85℃

7V5 400mw Zener Diode (PACK OF 10)

30.20 (Inc. GST)
25.60 (+18% GST Extra)

Specifications:

  • Nominal Zener Voltage (Vz): 7.5V
  • Maximum Regulator Current (Izm): 0.050A
  • Max. Reverse Leakage Current (Ir): 0.1µA
  • Forward Voltage Drop (Vf): 1.5V
  • Total Power Dissipation (Ptot): 500mW

PIC Programmer Development Board

1,183.54 (Inc. GST)
1,003.00 (+18% GST Extra)
Specifications: 
  • PIC Development Board for Microchip any 40 PIN PIC Series like. 16FXXX, 18FXXX (Example:  16F877A - 40 PIN).
  • ICSP Socket for Programming through PICKIT2 or PICKIT3.
  • On board Regulated 5v ,12v Supply, Easy to test with Burg Connectors wires.
  • An RS232 Serial Port, 7 Segment Multiplexed Display, DC Power Supply Connector(12v Ac or Dc).
  • READY INTERFACE For LCD display 2linex16Character, 24Cxx (I2C) (EEPROM), RTC (DS1307), 4 LED array, Matrix Key Pad, 4 Interrupt Switches, ADC Interface Support.
  • ULN2008 Support For Interfacing Stepper Motors. Package Content : PIC Development Board for Microchip any 40 PIN PIC Series like. 16FXXX, 18FXXX (EX. 16F877A - 40 PIN).

Ramps 1.4 Board 3D Printer Control Panel Mega Shield

587.64 (Inc. GST)
498.00 (+18% GST Extra)

Specifications:

  • Supply Voltage: 12V
  • Standard interfaces (as that of the extruder)
  • Reserved GCI like I2C and RS232
  • 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
  • Another 5A added to protect the component parts.
  • An 11A fuse is added to the hotbed.
  • Support 5 stepper drive board

ULN2003 Stepper Motor Driver

44.01 (Inc. GST)
37.29 (+18% GST Extra)

Specifications:

  • 5-12V power supply
  • 4-way signal indicator
  • Step angle: 5.625 x 1 / 64
  • Reduction ratio: 1 / 64
  • Phase: 4
  • Current / Phase: 5V

Robotics 801S Vibration / Shock Sensor Sensitivity Adjustable Analog Output

212.40 (Inc. GST)
180.00 (+18% GST Extra)
Specifications:
  • The wide detection range of vibration, no direction.
  • Has a signal output instruction.
  • When the output valid signal is high, the light goes out.
  • The sensitivity is adjustable (fine-tuning).
  • With mounting holes, firmware installation is flexible and convenient.

Vibration sensor module alarm Motion sensor module vibration switch SW-420

42.48 (Inc. GST)
36.00 (+18% GST Extra)
Specifications:
  • Operating Voltage: 3.3V to 5V DC
  • Operating Current: 15mA
  • Using SW-420 normally closed type vibration sensor
  • LEDs indicating output and power
  • It uses wide voltage LM393 comparator
  • Output format: digital switching output (0 and 1)

Vibration Switch Module

84.96 (Inc. GST)
72.00 (+18% GST Extra)
Specifications:
  • Component Type: SW-18015P
  • Maximum voltage: 12V
  • Rated Heating Current: 20mA
  • No direction, any angle can trigger the work.
  • This switch is suitable for the trigger of the small current circuit.