Showing 1–12 of 318 results
PlayStation PS2 Receiver adaptor, 4 DC Motors & 8 PWM Servo Controls
₹2,449.98 (Inc. GST)₹2,076.26 (+18% GST Extra)
Specifications:
- Use the TB6612 chipset to provide 1.2A (3A peak) output per channel and run a 4.5-13.5V DC motor
- Can drive 4 DC motors or 2 stepper motors
- Additional 4 PWM outputs are available to control 4 servos
- Support PS2 wireless controller
- Support Bluetooth module and ultrasonic sensor
- Customizable I2C address, supporting multiple drive stacking cascades
- Provides a complete code base and rich sample programs that are easy to use.
7cmx4cm White Wheel For DC Motors
₹53.10 (Inc. GST)₹45.00 (+18% GST Extra)
Specifications:-
- Shaft Diameter – 6 mm
- Wheel Diameter – 70 mm
- Wheel Width – 40 mm
Coreless Motors 612 Series 53000 RPM 3.7V for Micro-Quadcopters (Black+White Wire) CWW
₹147.50 (Inc. GST)₹125.00 (+18% GST Extra)
Features :
- This is High Speed and Low Torque motor
- They are equipped with high-quality magnets
- This coreless motor supports 2S battery
- Compatible for 65 mm Propeller
- Less noisy operation
- Offers low resistance
- Voltage: 3.7 V
- Current: 0.06 A
- Speed: 53000 RPM
- Motor diameter: 6 mm
- Motor length: 12 mm
- Shaft diameter: 1 mm
- Wire length: 38 mm
Coreless Motors 612 Series 53000 RPM 3.7V for Micro-Quadcopters (Red+Blue Wire) CW
₹147.50 (Inc. GST)₹125.00 (+18% GST Extra)
Features:
- This is High Speed and Low Torque motor
- They are equipped with high-quality magnets
- This coreless motor supports 2S battery
- Compatible for 65 mm Propeller
- Less noisy operation
- Offers low resistance
- Voltage: 3.7 V
- Current: 0.06 A
- Speed: 53000 RPM
- Motor diameter: 7 mm
- Motor length: 20 mm
- Output shaft length: 5 mm
- Shaft diameter: 1 mm
- Wire length: 38 mm
Refurbish DC5-30V 12V 24V 5A DC Motor Controller PWM Adjustable Speed Digital display encoder duty ratio frequency MAX 15A ZK-MG
₹525.10 (Inc. GST)₹445.00 (+18% GST Extra)
Specifications:
- Working voltage: DC5V~30V, input anti-reverse connection protection
- Rated current: 5A maximum current 15A
- Maximum power: 150W
- Working frequency: 1KHz~99KHz adjustable, 1KHz step, default frequency of 20KHz, accuracy of about 1%
- Duty cycle: 0-100%, 1% step
- Product size: 79mm*43mm*26mm
25GA-370-24V-130 RPM DC Gear Motor
₹401.56 (Inc. GST)₹340.30 (+18% GST Extra)
Specifications:
- It has a sturdy construction.
- Low Noise
- Shaft equips metal bushes for long life.
- Metal Gears for High performance
- It comes with High-Quality gears.
- High torque at very low Current Consumptions
L298N Dual H Bridge DC/Stepper Motor Driver Controller Module
₹198.94 (Inc. GST)₹168.60 (+18% GST Extra)
Specifications:
- Driver chip: L298N Dual H Bridge
- Supply voltage: VMS 5V – 35V
- Peak current IO: 2A per bridge
- Max power consumption: 20W
- Provides 4 LEDs that reflect the state of the control logic
- Independent direction, speed, and braking for each motor
N20 3V 500RPM Micro Metal Gear DC Motor With Encoder
₹449.01 (Inc. GST)₹380.51 (+18% GST Extra)
Specifications:
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 3V.
- Output Speed: 500RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
N20 3V 300RPM Micro Metal Gear DC Motor With Encoder
₹449.01 (Inc. GST)₹380.51 (+18% GST Extra)
Specifications:
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 3V.
- Output Speed: 300RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
N20 3V 250RPM Micro Metal Gear DC Motor With Encoder
₹449.01 (Inc. GST)₹380.51 (+18% GST Extra)
Specifications:
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 3V.
- Output Speed: 250RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
N20 3V 200RPM Micro Metal Gear DC Motor With Encoder
₹449.01 (Inc. GST)₹380.51 (+18% GST Extra)
Specifications:
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 3V.
- Output Speed: 200RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.
N20 3V 60RPM Micro Metal Gear DC Motor With Encoder
₹449.01 (Inc. GST)₹380.51 (+18% GST Extra)
Specifications:
- Encoder Test Wire Length: 140mm.
- Wheel Dia.: 43 mm.
- Rated Voltage: DC 3V.
- Output Speed: 60RPM.
- Milling Edge: 0.5 mm.
- Output Shaft Size: 3 x 10mm.
- Output Shaft type: D type.