USB to TTL PL2303 PL2303HX Cable 4Pin

Specifications:

Data transfer rates from 300 baud to 3Mbaud at TTL levels.
Supports RS485 and RS232.
Single-chip USB to UART conversion.
No additional firmware programming required.
Receive and Transmit LED drive signals.
USB2.0 full speed compatible.
Low USB bandwidth consumption.
Internal EEPROM with user-writable area.
Output can be directly connected to microcontroller UART or I/O.
Entire USB protocol handled by the electronics in the cable.
Integrated power-on-reset circuit.
UART signal inversion option.
True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input.
Operating temperature range: -40ºC to +85ºC.
128 byte receive buffer and 256 bytes transmit buffer, utilizing buffer smoothing technology to allow for high data throughput.
Cable length up to 1 meter.
FCC and CE are compliant.

SKU: RDNA-E6.2

Apple Shopping Event

Hurry and get discounts on all Apple devices up to 20%

Sale_coupon_15

₹159.30 (Inc. GST)
₹135.00 (+18% GST Extra)

In stock

Compare

Add to wishlist

19 People watching this product now!

Pick up from the RoboticsDNA Store in Pune / Dunzo

To pick up today

Free

Same Day Delivery in Pune

(Mon-Sat) (Please Place Order Before 1:30 PM)

Rs. 99

via Delhivery.com (Express Mode)

Our courier will deliver to the specified address

3-5 Days

Rs. 149

via Delhivery.com (Surface Mode)

Our courier will deliver to the specified address

4-7 Days

Rs. 69

Payment Methods:

Description

The cable is the easiest way ever to connect to your microcontroller/Raspberry Pi/Wi-Fi router serial console port. Inside the big USB plug is a USB to Serial conversion chip and at the end of the 1M cable are four-wire – red power, black ground, white RX into the USB port, and green TX out of the USB port.

The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V levels for interfacing with the most common 3.3V logic level chipsets.

Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi or Beagle Bone Black.

Also handy for hacking WI-FI routers to install alternate OS’s, or nearly any other 3.3V logic serial port. This is easier to use than an FTDI cable in many cases because the wires are separated.