Telephone Enquiry: +91 83296 49598/ 93227 63532

Cart

ALL CATEGORIES
More Categories Less Categories

Cart

Raspberry Pi Pico

349.28 (Including GST)

296.00 ( + 53.28 GST)

Specifications:

  1. RP2040 microcontroller chip designed by Raspberry Pi
  2. Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
  3. 264KB of SRAM, and 2MB of onboard Flash memory
  4. 26 × multi-function GPIO pins
  5. 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
  6. Temperature sensor

In stock (can be backordered)

Purchase this product now and earn 3 Points!

Compare
SKU: RDNA-2.24 Category:

Share this product

Description

Board Specifications

Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. Key features include:
  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
  • 264KB of SRAM, and 2MB of on-board Flash memory
  • Castellated module allows soldering direct to carrier boards
  • USB 1.1 with device and host support
  • Low-power sleep and dormant modes
  • Drag-and-drop programming using mass storage over USB
  • 26 × multi-function GPIO pins
  • 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating-point libraries on-chip
  • 8 × Programmable I/O (PIO) state machines for custom peripheral support
MicroPython animation

Documentation

Documentation for the Raspberry Pi Pico board and the RP2040 microcontroller:

MicroPython animation

Drag and drop MicroPython

You can program your Pico by connecting it to a computer via USB, then dragging and dropping a file onto it, so we’ve put together a downloadable UF2 file to let you install MicroPython more easily.

  1. Download the MicroPython UF2 file by clicking the button below.
  2. Push and hold the BOOTSEL button and plug your Pico into the USB port of your Raspberry Pi or other computer. Release the BOOTSEL button after your Pico is connected.
  3. It will mount as a Mass Storage Device called RPI-RP2.
  4. Drag and drop the MicroPython UF2 file onto the RPI-RP2 volume. Your Pico will reboot. You are now running MicroPython.

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.