This module is programmable control, can achieve thousands of functions, stable and reliable working performance, a built-in watchdog timer circuit, to ensure that the module for a long time to run!!!

Some of the common features are shown as follows:

Turn on the power supply, relay 1 is closed for N seconds, and then disconnect the relay 2 for N seconds.

When the power supply is turned on, relay 1 is switched off after N seconds, and then relay 2 is closed for N seconds and then is turned off.

The power supply is switched on, the relay 1, 2 have no action, when a signal or trigger button, relay 1 closed off after N seconds; then relay 2 closed off after N seconds, until the next trigger, repeat the same action.

Through the signal 1, 2 programming, the control can be achieved on the relay 1 and 2 arbitrarily.

When signal 1 has a signal, relay 1 is closed, relay 2 is disconnected; when signal 2 has a signal, relay 1 is turned off, and relay 2 is closed.

Can be connected to the NPN sensor signal, the sensor signal programming, to achieve arbitrary control of the relay.

When signal 1 is triggered, relay 1 is controlled, and when signal 2 is triggered, relay 2 is controlled.

Turn on the power supply, the control motor is turning N seconds, and then reverse N seconds, followed by the cycle.

When signal 1 has a signal, the motor is controlled to rotate; when signal 2 has a signal, the motor is reversed.

Features:

1. This programmable logic controller uses an industrial-grade 32-bit MCU with strong anti-interference and faster speed.
2. High-quality chip, stable performance, online download, online monitoring, automatic save when power off.
3. Program is written in ladder logic programming language, supports for GX-Developer, GX-work2.
4. The programming port is the port for program upload, download, test, and monitor.
5. It is reusable, stable, easy to learn. The PLC transmission baud rate is 9600.

Specifications:

1. Model: FX2N-20mr
2. Working Voltage: DC24 V Wide
3. Power Supply Voltage: 10-28VDC
4. Baud Rate: 9600
5. Programming Software: for GX-Developer, for GX-work2
6. Size: Approx. 86 x 73 x 20mm

Package Includes:

1 x PLC Regulator FX2N-20MR Industrial Control Board Relay Programmable Controller