OE-37 Hall Effect Two Channel Magnetic Encoder
₹398.84 (Including GST)
₹338.00 ( + ₹60.84 GST)
- Input Supply voltage: 4.5 to 24V
- Supply Current : 14A
- Output Current: 0.1A
- Operating Temperature (°C):
Out of stock
A two-channel Hall effect encoder is used to sense the rotation of a magnetic disk on a rear protrusion of the motor
shaft. The quadrature encoder provides a resolution of 7 counts per revolution of the motor shaft when counting both edges of both channels. The encoder has six pins output as shown.
OE-37 Hall Effect Two Channel Magnetic Encoder’s Hall sensor requires an input voltage, Vcc, between 4.5 and 24 V and draws a maximum of 10 mA. The A and B outputs are square waves from 0 V to Vcc approximately 90° out of phase. The frequency of the transitions tells you the speed of the motor, and the order of the transitions tells you the direction.
By counting both the rising and falling edges of both the A and B outputs, it is possible to get 7 counts per revolution of the motor shaft by both Channels.
Only logged in customers who have purchased this product may leave a review.