Showing 46–54 of 286 results
Ai-Thinker Rd-Kit with PHY6252 Chip
Specification :
- Model : Rd-Kit
- Size : 40*45(±0.2)mm
- Antenna : On-board antenna
- Frequency range : 2400~2483.5MHz
- Operation temperature : -20℃~70℃
- Storage environment : -40℃~125℃,<90%RH
- Power supply : 5V，supply current≥500mA
- Power supply : Type-C female seat
- Support radar interface Rd-02B、Rd-02C、Rd-03、Rd-03D、Rd-03E 和Rd-04
- Indicator light : 6PCS（1 red 5blue）
- UART rate : Default 115200 bps
- Security : AES-128
- Flash : 256KB
AiPi-Eyes-S1 Multi-Function Development Board Ai-M61-32S Wi-Fi6 BLE5.3 BL618 Open Source Hardware
Specifications:
- Ai-M61–32S module Features
- Module: Ai-M61–32S
- WIFI6+BLE5.3+Thread
- Support IEEE 802.11 b/g/n/ax protocol
- Wi-Fi security support WPS/WEP/WPA/WPA2/WPA3
- Support 20/40MHz bandwidth, 1T1R, Maximum rate 229.4 Mbps
- Support STA, SoftAP, STA+SoftAP and sniffer mode
- Dual-core 32-bit RISC-V CPU with FPU and DSP, the highest frequency can reach 320M
- 532KB SRAM, 128KB ROM, 4Kb eFuse
- Integrated RF Balun、PA/LNA
- Support XIP QSPI On-The-Fly AES Decryption (OTFAD)
- Support TrustZone
- Support AES-CBC/CCM/GCM/XTS mode
- Support MD5, SHA-1/224/256/384/512
- Support TRNG (true random number generator)
- Support for PKA (Public Key Accelerator) for RSA/ECC
- Support Wi-Fi Quick Connect with BLE
- Connector: screen, camera, microphone, speaker
- IC Chip Solution: BL618 chip,
- General AT commands can be used conveniently
- Support secondary development, Windows, Linux environment
AiPi-Eyes-S2 Development Board Ai-M61-32S Wi-Fi6 BLE5.3 Multi-Function Open Source Hardware
Specifications:
- Ai-M61–32S module Features
- Module: Ai-M61–32S
- WIFI6+BLE5.3+Thread
- Support IEEE 802.11 b/g/n/ax protocol
- Wi-Fi security support WPS/WEP/WPA/WPA2/WPA3
- Support 20/40MHz bandwidth, 1T1R, Maximum rate 229.4 Mbps
- Support STA, SoftAP, STA+SoftAP and sniffer mode
- Dual-core 32-bit RISC-V CPU with FPU and DSP, the highest frequency can reach 320M
- 532KB SRAM, 128KB ROM, 4Kb eFuse
- Integrated RF Balun、PA/LNA
- Support XIP QSPI On-The-Fly AES Decryption (OTFAD)
- Support TrustZone
- Support AES-CBC/CCM/GCM/XTS mode
- Support MD5, SHA-1/224/256/384/512
- Support TRNG (true random number generator)
- Support for PKA (Public Key Accelerator) for RSA/ECC
- Support Wi-Fi Quick Connect with BLE
- Connector: screen, camera, microphone, speaker
- IC Chip Solution: BL618 chip,
- General AT commands can be used conveniently
- Support secondary development, Windows, Linux environment
Antenna For SIM800L GPRS GSM Module band
Specification:
Antenna with IPEX Connector
- Name: 2G 3G IPEX antenna
- Connector type: ipx13
- Gain definition: 3dBi (Typical)
- Frequency band definition: 1710
2170MHz 800960 - Impedance definition: 50 ohm
- Impedan
Quad-Band Antenna – Helix
- Gain: 2-3dBi
- Impedance: 50 Ohm
- Frequency range: 824MHz – 960 Mhz or 1710 MHz – 1990MHz
- Length total: 24mm
- Diameter: 5mm
Arduino Micro- iRobotics
AT-09 Bluetooth 4.0 UART Transceiver Module CC2541 Compatible with HM-10
Bluetooth Stereo Adapter Audio Receiver
Specifications:
- Input Volt - 5 V DC, Audio Out : L R G (it must be connected to amplifire )
- Make Any Speaker Wireless, Make your Car Audio System Wireless
- Convers Speakers into Bluetooth Speakers
- Allows you to play songs to your speakers directly from your phone, Compact and Small can be powered with usb wall power adapter
- Can buy with PAM8403 Mini 5V Digital Small Power Amplifier Board
Bluetooth Transceiver Module Base For HC-05
Features:
- Works with any USB Bluetooth adapters.
- Easy to use and completely encapsulated.
- This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.
- The Bluetooth Module Baseboard can be compatible with the master mode, slave mode and both master-slave mode.
- Works for Bluetooth TTL transceiver module which allows your target device to both send and receive the TTL data.
- The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.
- This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V.
