Showing 1–9 of 33 results

Water / Flow / PH / Moisture

1/4 inch Brass Water Flow Sensor – SEN-HZ41WC

354.00 (Inc. GST)
300.00 (+18% GST Extra)
Specifications:
  • Water quality requirement: Drinking water health standards, 0~80℃
  • Flow range: 0.35 ~ 3.0 Liter/min
  • Withstand hydraulic pressure: ≤1.75 MPa
  • Voltage/electric current: DC 4.5 ~ 18 Volt, ≤15mA
  • Insulation resistance: >100MΩ
  • Electrical strength: AC500V, 50HZ
  • Output level: Rated voltage DC5V, high level ≥4.5 Volt, low level ≤0.5 Volt
  • Pulse duty cycle: 50%
  • Flow characteristic: F=73Q, F:HZ, Q:L/min,±10%
  • Cumulative flow conversion: 1 Liter water=1780 pulse, accuracy: 8%

4 in 1 Soil PH Meter Soil Tester PH Moisture Meter Temperature Sunlight Measurement Analysis Acidity Alkali(Without Battery)

720.98 (Inc. GST)
611.00 (+18% GST Extra)

Specifications:

  1. 4 Different Reading on one Screen
  2. On-Screen Battery Level Indicator
  3. Unit change Switch
  4. 200 mm probe to measure the root level
  5. Yellow Backlight Screen
  6. Power sleep mode for long battery life
  7. Portable and Plug and Play device

Air / Oxygen Flow Meter Sensor 0-150 SLM

8,704.86 (Inc. GST)
7,377.00 (+18% GST Extra)
Specifications:
  • Model No : XGZF4150AA
  • Range : 0-150 SLM
  • Linear output : Analog

Analog TDS Sensor Module Normal Quality

649.00 (Inc. GST)
550.00 (+18% GST Extra)
Specifications:
  1. Wide voltage operation: 3.3~5.5V
  2. 0~2.3V analog signal output, compatible with 5V, 3.3V two control systems
  3. The excitation source is an AC signal, effectively preventing probe polarization
  4. Waterproof probe for long-term immersion in water

Electrode Probe for Liquid pH Value Detection Sensor Module

679.99 (Inc. GST)
576.27 (+18% GST Extra)
  1. PH range: 0-14 PH
  2. Temperature range: 0-60℃
  3. Zero-point: 7 ± 0.5PH
  4. Alkali Error: 0.2PH
  5. Theoretical Percentage Slope: ≧98.5%
  6. Internal Resistance: ≦250MΩ
  7. Response Time: ≦1min

Float Sensor Water/Liquid Level Switch Black

236.00 (Inc. GST)
200.00 (+18% GST Extra)
Specifications:
  • Rating contract (Max.): 10 W
  • Switching power supply (Max.): 110VDC
  • Resistance contract (Max.): 100 Ω
  • Approx. Float Ball Size (mm) : 24×17 (L x D)
  • Body Total Length (mm) : 85
  • Cable Length (cm) : 37

Float Sensor Water/Liquid Level Switch White (30 MM)

212.40 (Inc. GST)
180.00 (+18% GST Extra)

Specifications:

  • Contact Rating: 10 W.
  • Switching Voltage: 220 V.
  • Switching Current: 0.5 A.
  • Breakdown Voltage: 220 VDC.
  • Carry Current: 1 A.
  • Contact Resistance: 100 mΩ.

Float Sensor Water/Liquid Level Switch White (40 MM)

236.00 (Inc. GST)
200.00 (+18% GST Extra)

Specifications:

  1. Contact Rating: 10 W.
  2. Switching Voltage: 220 V.
  3. Switching Current: 0.5 A.
  4. Breakdown Voltage: 220 VDC.
  5. Carry Current: 1 A.
  6. Contact Resistance: 100 mΩ.
 

Liquid pH Value Detection Sensor for Arduino

816.99 (Inc. GST)
692.37 (+18% GST Extra)
  1. Heating voltage: 5±0.2V
  2. Working current: 5-10mA
  3. The detection concentration range: PH0-14
  4. The detection range of temperature: 0-60 centigrade
  5. The response time: ≤ 5S
  6. Stability time: ≤ 60S
  7. Power consumption: ≤ 0.5W