Showing 49–60 of 670 results

Sensors

4 Channel Infrared Tracing Module

236.00 (Inc. GST)
200.00 (+18% GST Extra)

Specifications :

  1. Working voltage (V): 3.3 ~ 5
  2. Working current (A): Above 1A
  3. Operating Temperature (℃): -10 ~ +50
  4. Mounting hole: M3
  5. Detection range: 1mm ~ 60 cm adjustable.

4 in 1 Soil PH Meter Soil Tester PH Moisture Meter Temperature Sunlight Measurement Analysis Acidity Alkali(Without Battery)

720.98 (Inc. GST)
611.00 (+18% GST Extra)

Specifications:

  1. 4 Different Reading on one Screen
  2. On-Screen Battery Level Indicator
  3. Unit change Switch
  4. 200 mm probe to measure the root level
  5. Yellow Backlight Screen
  6. Power sleep mode for long battery life
  7. Portable and Plug and Play device

4-20mA to 5V Converter for Arduino Industrial Sensor Interface Board

124.99 (Inc. GST)
105.93 (+18% GST Extra)

Specifications:

  1. Current Input support 4-20Ma & 0-20mA
  2. voltage output support 0-3.3V 0-5V 0-10V
  3. Wide supply voltage range, the output has multiple voltage ranges
  4. High stability, good linearity, industrial grade

4.5 Inch Flex Sensor

949.90 (Inc. GST)
805.00 (+18% GST Extra)

Specifications:

  • Operating  voltage of FLEX SENSOR: 0-5V
  • Can operate on LOW voltages
  • Power rating : 0.5Watt (continuous), 1 Watt (peak)
  • Life: 1 million
  • Operating temperature: -45ºC to +80ºC
  • Flat Resistance: 25K Ω
  • Resistance Tolerance: ±30%
  • Bend Resistance Range: 45K to 125K Ohms(depending on bend)
  • Compatiable with  Arduino 

4×3 Matrix 12 keys Membrane Switch Keypad

52.01 (Inc. GST)
44.07 (+18% GST Extra)

Specifications:

  • Operating Voltage (V): 12 DC
  • Contact Resistance: 500Ω
  • Insulation Resistance: 100MΩ
  • Dielectric Strength: 250VRms
  • Max. voltage rating (V): 35 VDC
  • Max. current rating: 100mA

41F Hall Effect Sensor (Pack of 2)

41.30 (Inc. GST)
35.00 (+18% GST Extra)

Specification:

  • Limit parameters (25 ℃)
  • Power supply voltage VCC · · · · · · · · · · · · · · · · · · · · · 4.5 ~ 24 v
  • Output current IO · · · · · · · · · · · · · · · · · · · · · · 25 ma
  • Working environment temperature TA · · · · · · · · · · · · · · · – ~ 150 ℃
  • Storage temperature range TS · · · · · · · · · · · · · · · · – 55 ~ 150 ℃

44 Keys RGB IR Remote Controller for 12V 5050 RGB LED Strip

184.08 (Inc. GST)
156.00 (+18% GST Extra)

Specifications:

  1. Supply voltage: DC 12V
  2. Output current: 2 A each color
  3. Connecting mode: common anode
  4. Output: Three CMOS Drain-open Output
  5. Number Of buttons: 44
  6. Working temperature: -20℃-60℃

44E A1344EUA-T Hall Sensor (Pack of 2)

35.40 (Inc. GST)
30.00 (+18% GST Extra)

Specification:

  • Digital Output Hall-effect sensor.
  • Operating voltage: typically 5V.
  • Output Current: 25mA.
  • It can be used to detect both the poles of a magnet.

49E Hall Effect Sensor (Pack of 2)

47.20 (Inc. GST)
40.00 (+18% GST Extra)

Specification:

  • Supply Voltage – 3 to 6.5 V
  • Max Output Current – 20 mA
  • Quiescent Output Voltage- ½ of VCC
  • Sensitivity- 2.5 mV/G
  • Minimum Output Voltage – 0.86 V
  • Max Output Voltage – 4.21 V

Dimensions (Including Pins):

  • Length -17.5 mm (0.69″)
  • Width- 4 mm (0.16″)
  • Thick- 1.52 mm (0.06″)
  • Weight -0.11 g (0.004 o

4X4 Matrix Membrane Keypad

49.01 (Inc. GST)
41.53 (+18% GST Extra)

Specifications:

  • Operating Voltage (V): 12 DC
  • Operating temperature: 32 to 122 °F
  • Maximum Rating: 24 VDC, 30 mA
  • Keypad Dimensions: 6.9 cm X 7.9 cm
  • Cable dimensions: 2.0 cm X 8.8 cm
  • Maximum rating: 24 VDC, 30 mA
  • Pin counts: 8
  • Compatible with: Arduino, controller, processor etc

5-24V Buzzer Continues Beep- Big 27C

47.20 (Inc. GST)
40.00 (+18% GST Extra)

Specifications:

All Electrical Parameters are measured ad 12 VDC at 30 cm. distance

  • Sound Level : Min. 85 dB
  • Operating Temperature (Deg. C) : -20 +50
  • Tone: Continuous
  • Operating Voltage (V) : 1.5 ~ 15 VDC
  • Current : Max 15mA
  • Oscillation Frequency : 4 +/-500 Hz