Showing 73–90 of 159 results
Official Micro-HDMI (Male) to Standard HDMI (Male) Cable for Raspberry Pi (1 METER )
Official Raspberry Pi 4 Case Red White
Official Raspberry Pi Zero Case
Official USB type-C 15.3W Power Supply For Raspberry Pi 4
Official USB type-C 15.3W Power Supply For Raspberry Pi 4-Black
OV5647 5MP 1080P IR-Cut Camera for Raspberry Pi 3/4 with Automatic Day Night Mode
OV5647 5MP 1080P IR-Cut Camera for Raspberry Pi 3/4 with Manual Day Night Mode
Overview:
-
- Raspberry Pi Camera, supports all revisions of the Pi
- Using IR-CUT filter, it can eliminate color distortion in the daylight
- 5-megapixel OV5647 sensor
- Can Attach IR LEDs if Night Vision mode is required
- The screw hole on the camera is used to both fix the infrared lights and through the power for the lights.
PCF8563 RTC Board For Raspberry Pi Real Time Clock Module-Blue
Plastic ABS Case Box for Raspberry Pi 3 A+ Model with Ventilation
Prototyping Shield for Raspberrry PI
Specifications:
- A big prototyping area, half of which is 'breadboard' style and half of which is 'perfboard' style so you can wire up DIP chips, sensors, and the like.
- Along the edges of the proto area, all the GPIO/I2C/SPI and power pins are broken out to 0.1" stips so you can easily connect to them.
- On the edges of the prototyping area, all of the breakout pins are also connected to labeled 3.5mm screw-terminal blocks. This makes it easy to semi-permanently wire in sensors, LEDs, etc.
- There's also a 4-block terminal block broken out to 0.1" pads for general non-GPIO wiring.
- A SOIC and a TSSOP surface mount chip breakout area, for those chips that dont come in DIP format.
- Comptiable EEPROM chip: AT24C08BN-SP25-T
- POWER LED indicator
- Space between holes is standard 2.54 mm.
- Extended IO Port with Terminal output can be connected directly to external module.
RASBERRY PI 3 B+ BCM2837B0 SoC, IoT, PoE Enabled
Specification
- Model : Raspberry Pi 3 Model B+
- Processor : Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- RAM:1GB LPDDR2
- Connectivity : Gigabit Ethernet over USB 2.0
- Operating Power : 5V/2.5A DC
- GPIO : Standard 40-pin GPIO Header
- Video and Sound : 2-Lane MIPI DSI Display Port
- Clock Speed:1.4 GHz
- On Board Ports : 15-pin MIPI Camera Serial Interface (CSI-2), 4 x USB 2.0 Connector, 4-
- pole stereo output and composite video port, 40-pin 2.54 mm (2×20 strip) GPIO, Full-size
- HDMI Output Port
- Micro-SD Card Slot : Yes (FAT32 format), support maximum 32G Micro SD Card
- Operating Temperature Range (°C):-10 to 60
- Weight (gm):44
- Length (mm):85
- Width (mm):56
- Height (mm):23
- HDMI Port : Full Size
- Shipping Weight :0.047 kg
- Shipping Dimensions:9 × 6 × 4 cm
Raspberry 3B+ Injection Molding Case Supporting Camera
Features:
- Compatible for All variants of the Raspberry Pi 3 Model B+
- Easy to assemble and highly durable material
- Locking screw holes and anti-slip rubber feet at the back.
- Uses: For Raspberry Pi surveillance camera shell
- The horizontal angles are 360 degrees and 90 degrees, showing a large view of the camera.
Raspberry 4B Black Injection Molding Premium Case Supporting 3007 Fans
Raspberry Pi 16GB SD Card with Preloaded Noobs Raspbian
Specification:
- Memory Size: 16 Gigabytes
- Card Type: Micro SDHC UHS-I Card Class 10
- Read and Write Speed: 10 mb/Sec approx
- High-speed Card can be used for both Mobile phones and Raspberry Pi
- Works with all Raspberry Pi Models
- Fully Qualified by the Raspberry Pi Foundation for Optimum Performance
- Preloaded with the NOOBS Operating System
Raspberry Pi 3 3B+ Frosted Case
Specifications:
- 2-piece frosted ABS case only
- All ports are accessible
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- Dimensions in mm (LxWxH): 91x66x30
- Weight (gm): 44
- Recommeded Fan size: 3010 5V fan
Raspberry Pi 3 A+
Specifications :
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 512MB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
- Extended 40-pin GPIO header
- Full-size HDMI
- Single USB 2.0 ports
- CSI camera port for connecting a Raspberry Pi Camera Module
- DSI display port for connecting a Raspberry Pi Touch Display
- 4-pole stereo output and composite video port
- microSD card port for loading your operating system and storing data
- 5V/2.5A DC power input
Raspberry Pi 3 A+ Case
Specifications:
Compatibility: Specifically designed for Raspberry Pi 3 Model A+.
The Raspberry Pi A+ Case has been designed to fit both the Pi 3 Model A+ and the Pi 1 Model A+.
The high-quality ABS construction consists of two parts. The base features cut-outs to allow access to the micro SD Card and the HDMI, audio/video and USB ports, as well as the power connector.
Raspberry Pi 3 GPIO Board Multi-functional Cascade Expansion Extension Board Module
Specifications:
- Communication connections: 1 TXD0 (broadcast) and 1 RXD0 (reception)
- Power connections: 5 of 3.3V, 2 of 5V and 5 of GND
- Â Pulse width modulation (PWM) connections: 2
- GPIO connections: 11
- PCM audio connections: 3
- Connections with clock (CLK): 2
- Peripheral serial bus interface (SPI) connections: 1
- Input master / slave output connections (MISO): 1
- Connections system validation chip (SCE): 2
- I2C port connections: 8 (SDA, SCL, GOUI, EDAT, MOSI)