Showing 82–90 of 159 results
Prototyping Shield for Raspberrry PI
Specifications:
- A big prototyping area, half of which is 'breadboard' style and half of which is 'perfboard' style so you can wire up DIP chips, sensors, and the like.
- Along the edges of the proto area, all the GPIO/I2C/SPI and power pins are broken out to 0.1" stips so you can easily connect to them.
- On the edges of the prototyping area, all of the breakout pins are also connected to labeled 3.5mm screw-terminal blocks. This makes it easy to semi-permanently wire in sensors, LEDs, etc.
- There's also a 4-block terminal block broken out to 0.1" pads for general non-GPIO wiring.
- A SOIC and a TSSOP surface mount chip breakout area, for those chips that dont come in DIP format.
- Comptiable EEPROM chip: AT24C08BN-SP25-T
- POWER LED indicator
- Space between holes is standard 2.54 mm.
- Extended IO Port with Terminal output can be connected directly to external module.
RASBERRY PI 3 B+ BCM2837B0 SoC, IoT, PoE Enabled
Specification
- Model : Raspberry Pi 3 Model B+
- Processor : Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- RAM:1GB LPDDR2
- Connectivity : Gigabit Ethernet over USB 2.0
- Operating Power : 5V/2.5A DC
- GPIO : Standard 40-pin GPIO Header
- Video and Sound : 2-Lane MIPI DSI Display Port
- Clock Speed:1.4 GHz
- On Board Ports : 15-pin MIPI Camera Serial Interface (CSI-2), 4 x USB 2.0 Connector, 4-
- pole stereo output and composite video port, 40-pin 2.54 mm (2×20 strip) GPIO, Full-size
- HDMI Output Port
- Micro-SD Card Slot : Yes (FAT32 format), support maximum 32G Micro SD Card
- Operating Temperature Range (°C):-10 to 60
- Weight (gm):44
- Length (mm):85
- Width (mm):56
- Height (mm):23
- HDMI Port : Full Size
- Shipping Weight :0.047 kg
- Shipping Dimensions:9 × 6 × 4 cm
Raspberry 3B+ Injection Molding Case Supporting Camera
Features:
- Compatible for All variants of the Raspberry Pi 3 Model B+
- Easy to assemble and highly durable material
- Locking screw holes and anti-slip rubber feet at the back.
- Uses: For Raspberry Pi surveillance camera shell
- The horizontal angles are 360 degrees and 90 degrees, showing a large view of the camera.
Raspberry 4B Black Injection Molding Premium Case Supporting 3007 Fans
Raspberry Pi 16GB SD Card with Preloaded Noobs Raspbian
Specification:
- Memory Size: 16 Gigabytes
- Card Type: Micro SDHC UHS-I Card Class 10
- Read and Write Speed: 10 mb/Sec approx
- High-speed Card can be used for both Mobile phones and Raspberry Pi
- Works with all Raspberry Pi Models
- Fully Qualified by the Raspberry Pi Foundation for Optimum Performance
- Preloaded with the NOOBS Operating System
Raspberry Pi 3 3B+ Frosted Case
Specifications:
- 2-piece frosted ABS case only
- All ports are accessible
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- Dimensions in mm (LxWxH): 91x66x30
- Weight (gm): 44
- Recommeded Fan size: 3010 5V fan
Raspberry Pi 3 A+
Specifications :
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 512MB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE
- Extended 40-pin GPIO header
- Full-size HDMI
- Single USB 2.0 ports
- CSI camera port for connecting a Raspberry Pi Camera Module
- DSI display port for connecting a Raspberry Pi Touch Display
- 4-pole stereo output and composite video port
- microSD card port for loading your operating system and storing data
- 5V/2.5A DC power input
Raspberry Pi 3 A+ Case
Specifications:
Compatibility: Specifically designed for Raspberry Pi 3 Model A+.
The Raspberry Pi A+ Case has been designed to fit both the Pi 3 Model A+ and the Pi 1 Model A+.
The high-quality ABS construction consists of two parts. The base features cut-outs to allow access to the micro SD Card and the HDMI, audio/video and USB ports, as well as the power connector.
Raspberry Pi 3 GPIO Board Multi-functional Cascade Expansion Extension Board Module
Specifications:
- Communication connections: 1 TXD0 (broadcast) and 1 RXD0 (reception)
- Power connections: 5 of 3.3V, 2 of 5V and 5 of GND
- Â Pulse width modulation (PWM) connections: 2
- GPIO connections: 11
- PCM audio connections: 3
- Connections with clock (CLK): 2
- Peripheral serial bus interface (SPI) connections: 1
- Input master / slave output connections (MISO): 1
- Connections system validation chip (SCE): 2
- I2C port connections: 8 (SDA, SCL, GOUI, EDAT, MOSI)