Showing 121–144 of 513 results
2S 5A 8.4V 18650 Lithium Battery Charger Board Protection Module
₹123.90 (Inc. GST)₹105.00 (+18% GST Extra)
Specification:
- Input Voltage: 8.4 – 9V.
- Overcharge Detection Voltage: 4.25-4.35V±0.05V.
- Over-Discharge Detection Voltage: 2.3-3.0V±0.05V.
- Maximum Working Current: 5A.
- Transient Current: 7A.
2S-6S Lipo Battery USB Converter T Plug Cellphone Charger Adapter
₹448.40 (Inc. GST)₹380.00 (+18% GST Extra)
Specification:
- Input: 6 to 26VDC (2S-6S LiPo Batteries)
- Output: 5V-2A DC
- Input Connector Type: T plug Male
- Output Interface: USB
- 7 Segment LED Display to monitor battery Voltage
- Anti-slip plug, good contact performance
- Precision display by TW programmed MCU
2S-6S Lipo Battery with XT60 Plug to USB Cellphone Charger Adapter with Voltage Display
₹442.50 (Inc. GST)₹375.00 (+18% GST Extra)
Specification:
- Input: 6 to 26VDC (2S-6S LiPo Batteries)
- Output: 5V-2A DC
- Input Connector Type: XT60 plug Male
- Output Interface: USB
- 7 Segment LED Display to monitor battery Voltage
- Anti-slip plug, good contact performance
- Precision display by TW programmed MCU
2S-6S Lipo Parallel Charging Board / Charging Plate T plug for RC Battery Charger Imax 6 Charger B6AC B8
₹532.01 (Inc. GST)₹450.85 (+18% GST Extra)
Specification :Â
- Charge Cell: 2~6S.
- Connector type: JST-XH
- Operating Voltage: 0~22.2VDC.
- Max current: 30A.
- Battery: 6 packs (same capacity & cell count).
- Thicken PCB copper foil, allow security using 40A charging current.
- Amass 7U gold plating plug plating.
- Use a safety fuse (50A) to protect the circuit.
2S-6S Lipo Parallel Charging Board / Charging Plate XT60 plug for RC Battery Charger Imax 6 Charger B6AC B8
₹525.00 (Inc. GST)₹444.92 (+18% GST Extra)
Specification :Â
- Input Connector : XT60 Female
- Maximum Current : 30A
- Operating Voltage : 0 – 22.2VDC
- Length : 144 mm
- Height : 29 mm
- Width : 68 mm
2x AA Battery Back To Back Holder Case Box(Pack of 2)
₹31.86 (Inc. GST)₹27.00 (+18% GST Extra)
Specifications :
- lightweight
- convenient to carry This battery box holder with wires
- suitable for 2 x AA batteries With spring clip design
- Wire Length(mm):140
- Weight(g):5(each)
3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
₹226.56 (Inc. GST)₹192.00 (+18% GST Extra)
Specifications :
- 3S 11.1V 12.6V 20A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 20A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power below 135W
3 x 1.5V AA Battery Holder Without Cover
₹48.38 (Inc. GST)₹41.00 (+18% GST Extra)
Specification:
- Cell Quantity: 3
- Battery type: AA
- Storage temperature: 25ºC
- Max Operate temperature: 80ºC
3 x 1.5V AAA battery holder with cover and On/Off Switch
₹49.00 (Inc. GST)₹41.52 (+18% GST Extra)
Specification:
- Holds 3 AAA batteries
- With a cover and Locking
- Comes with an ON/OFF switch
- Cable length: 15cm
- Internal Connection: Series
3 x 18650 Battery Holder, Without Cover
₹63.72 (Inc. GST)₹54.00 (+18% GST Extra)
Specifications :
- Hold 3 standard 18650 batteries.
- Wire Length: 15 cm.
- Output: 11.1 V.
- Dimension (Approx.) : 76 x 60 x 18 mm.
- Weight: 18 gm.
- High-quality plastic material
3-5V to 1000KV Step Up Transformer
₹166.38 (Inc. GST)₹141.00 (+18% GST Extra)
Specification:
- Input Voltage: DC3.6V-6V
- Input Current: 2A-5A
- Output Voltage: DC 500KV-1000KV (Please pay attention to safety when used)
- Input Line Length: about 100mm (red is positive)
- Output Line Length: about 160mm
3.3V/5V MB102 Breadboard Power Supply Module
₹69.62 (Inc. GST)₹59.00 (+18% GST Extra)
Specifications:
- Compatible with 5V, 3.3V.
- Input Voltage :6.5-12V (DC) or USB power.
- Output voltage: 3.3V, 5V switchable.
- Maximum Output Current: <700ma.
- Two-way independent control.
- Can be switched to 0V, 3.3V, 5V.
- On-board Two sets of 3.3V, 5V DC output pins, Facilitate the external leads.
3.7V Lipo Rechargeable Battery Model KP-450825
₹118.00 (Inc. GST)₹100.00 (+18% GST Extra)
Specifications:
- Voltage: 3.7V
- Battery Type: Lithium Polymer
- Battery Chemistry Type: LiPO
- Capacity: 70mAh
3.7V 0.12W Lipo Rechargeable Battery Model BP0301
₹177.00 (Inc. GST)₹150.00 (+18% GST Extra)
Specifications:
- Voltage: 3.7V
- Capacity: 0.12W
- Approx Size: 20x8x4 (mm)
3.7V 1000mAh 14500 Battery Pack
₹233.64 (Inc. GST)₹198.00 (+18% GST Extra)
Specifications:
- Voltage: 3.7V
- Current:1000 mah
- 14500 Battery Pack
- 2 pin Female Connector Connected.
- Durable Battery.
3.7V 1000mAH Lipo Battery Model KP- 423048
₹295.00 (Inc. GST)₹250.00 (+18% GST Extra)
Specifications:
- Voltage: 3.7V
- Capacity: 1000mAh
- Approx Size : 48x30x4.2 (in mm)
3.7V 1000mAh Lipo Rechargeable Battery Model KP 303450
₹271.40 (Inc. GST)₹230.00 (+18% GST Extra)
Specifications :
- Voltage: 3.7V
- Capacity: 1000mAh
- Size : 50x34x4 (in mm)
- Weight : 10gm
3.7V 1050mAH (Lithium Polymer) Lipo Rechargeable Battery Model KP-403450
₹289.10 (Inc. GST)₹245.00 (+18% GST Extra)
Specifications:Â
- Voltage: 3.7V
- Capacity: 1050mAh
- Size : 50x34x4 (in mm)
- Weight : 10gm
3.7V 125mah Lipo Battery Model PL4112246
₹116.82 (Inc. GST)₹99.00 (+18% GST Extra)
Specifications:
- Voltage: 3.7V
- Capacity: 125mAh
- Approx Size: 24*12*4
3.7V 1500mAh (Lithium Polymer) Lipo Rechargeable Battery Model KP-523450
₹395.30 (Inc. GST)₹335.00 (+18% GST Extra)
Specifications:Â
- Voltage: 3.7V
- Capacity: 1500mAh
- Approx. Size – 50x34x5 (in mm)
3.7V 160mAH Lipo Battery Model KP-401020
₹100.30 (Inc. GST)₹85.00 (+18% GST Extra)
Specifications:
- Voltage: 3.7V
- Capacity: 160mAh
- Approx Size : 20x10x4 (in mm)
3.7V 1800mAh (Lithium Polymer) Lipo Rechargeable Battery Model KP-783048
₹354.00 (Inc. GST)₹300.00 (+18% GST Extra)
Specifications:Â
- Voltage: 3.7V
- Capacity: 1800mAh
- Approx. Size –48 x30x8 (in mm)
3.7V 1800mAH Lipo Battery Model KP- 503450
₹330.40 (Inc. GST)₹280.00 (+18% GST Extra)
Specifications:
- Voltage: 3.7V
- Capacity: 1800mAh
- Approx Size : 50x34x5 (in mm)
3.7V 180mAh Lipo Rechargeable Battery Model KP 401025
₹177.00 (Inc. GST)₹150.00 (+18% GST Extra)
Specifications:
- Voltage: 3.7V
- Capacity: 180mAh
- Approx Size: 25x10x4 (mm)