Showing 457–468 of 513 results
Filter by price
Batteries & Power Supply
PL401223GH 3.85V 130mAH for Bluetooth handset Battery
₹177.00 (Inc. GST)₹150.00 (+18% GST Extra)
Specifications:
- Voltage: 3.85V
- Capacity: 130mAh
- Approx Size: 23x12x4 (mm)
Precision 5V 700mA (3.5W) Isolation Power Supply Module AC-DC Step- Down Module 220V to 5V
₹89.00 (Inc. GST)₹75.42 (+18% GST Extra)
Specification:
- Input Voltage: 220VAC
- Output Voltage: 5 VDC.
- Output Power: 3.5W.
- Output overload and short circuit protection.
QC2.0 DC-DC Buck Converter Charging Step down module 6-32v 9v 12v 24v to fast Quick charger circuit board 3v 5v 12v
₹399.00 (Inc. GST)₹338.14 (+18% GST Extra)
Specification :Â
- Â Input voltage: 6V-32V
- Â Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge
- Â Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
- Â Output voltage cable compensation function
- Â Conversion efficiency: 90%-97%
- Â Support multiple fast-charging protocols
- Â Input overvoltage and under-voltage protection
- Â Input overcurrent protection
- Â Output overcurrent, short circuit protection
- Â Machine over temperature protection
QC4.0 QC3.0 USB Type-C 6-35 V Step Down Buck Module SW3516
₹578.20 (Inc. GST)₹490.00 (+18% GST Extra)
Specifications :
- Input voltage range: 6V to 35V
- Output voltage:Â 5V
- Conversion efficiency: 90% to 97%
- Dimension:50x20x11 mm
QC4.0 QC3.0 USB Type-C 6-35 V Step Down Buck Module SW3518
₹702.10 (Inc. GST)₹595.00 (+18% GST Extra)
Specifications :
- Input voltage range: 6V to 35V
- Output voltage:Â 5V
- Conversion efficiency: 90% to 97%
- Dimension:50x20x11 mm
Raspberry Pi Accessory, Raspberry Pi 4 Model B Official PSU, USB-C, 5.1V, 3A, UK Plug, White
₹749.01 (Inc. GST)₹634.75 (+18% GST Extra)
- Good Quality material
- 96-230Vac operating input range
- 50,000 hours MTBF
- 6-month warranty.
- Input Current: 0.5A maximum
- Input Power consumption (no load): 0.075W maximum
- USB-C connection goes straight into your Raspberry Pi
Refurbished 11.1V 2600mAh 18650 3S 1C Li-ion Battery Pack with BMS
₹465.25 (+18% GST Extra)
Specifications:
- Voltage: 11.1V
- Over Charger Protection
- Max Discharge Current : 2.5A
- Full charge voltage 12v
- Maximum discharge voltage: 9V
Roofer 3.7V 2600mAH 3C Cell For EV Battery
₹194.70 (Inc. GST)₹165.00 (+18% GST Extra)
Specification :
- Nominal Capacity: 2600 maH
- Nominal Voltage: 3.7V
- Discharge Rating: 3C
- Form Factor: 18650
- Life cycle: 1000 Cycles
Signal Amplifier AD620 Microvolt/Millivolt Amplifier Signal Booster Amplifier 100μV-300mV Input Low Volt Amp Module Signal Transmitter Board
₹256.01 (Inc. GST)₹216.95 (+18% GST Extra)
TECHNICAL SPECIFICATIONS:
- Power Requirement : 3.5-10V (VIN pin)
- Â Current : Max Sink Current 20mA, Max Source Current : Â 30mA
- Bandwidth : Gain = 100 , 120kHz
-  Input Signal  Range :  100uV – 300mV
- Â Input Signal Type : AC or DC
-  Amplification  Range :  1.5 – 1000x
-  Output Voltage  Max :  VIN – 2V
- Â Offset Voltage Typical / Max :Â 30uV / 125uV
- Â Input Bias Current Typical / Max : 0.5nA / 2.0nA.
- Â Offset Voltage Drift Max : 1uV / degree
- Common Mode Rejection Ratio Gain = 10 : 100dB
- Dimensions : CB (L x W) 32 x 22mm (1.3 x 0.87″)
Single Hole Electrical Insulating Adhesive Mat for 18650 Battery Cell Terminal Insulation – 120 Pcs
₹141.60 (Inc. GST)₹120.00 (+18% GST Extra)
Specifications:
- Material: Adhesive cardboard paper for battery insulators
- Size: Outer ring diameter:17mm/0.67″;Inner ring diameter:10mm/0.39″;Thickness:0.25mm/0.01″
- Advantage: Safe and stable, better protection to avoid battery shorts
- Package: Including 120pcs battery ring insulator adhesive paper
- Better protection to avoid short circuits on batteries.
- Perfect Build for DIY battery packs!
Single Hole Electrical Insulating Adhesive Mat for 21700 Battery Cell Terminal Insulation – 1 Sheet ( 80 Pcs)
₹70.80 (Inc. GST)₹60.00 (+18% GST Extra)
Specifications:
- Material: Adhesive cardboard paper for battery insulators
- Size: Outer ring diameter: 20 mm
- Inner ring diameter: 10 mm
- Thickness: 0.25mm
- Advantage: Safe and stable, better protection to avoid battery shorts
- Package: Including 120pcs battery ring insulator adhesive paper
- Better protection to avoid short circuits on batteries.
- Perfect Build for DIY battery packs
Single Hole Electrical Insulating Adhesive Mat for 32650 Battery Cell Terminal Insulation – 1 Sheet ( 40 Pcs)
₹41.30 (Inc. GST)₹35.00 (+18% GST Extra)
Specifications:
- Material: Adhesive cardboard paper for battery insulators
- Size: Outer ring diameter:32 mm –
- Inner ring diameter: 16 mm
- Thickness: 0.25mm
- Advantage: Safe and stable, better protection to avoid battery shorts
- Package: Including 120pcs battery ring insulator adhesive paper
- Better protection to avoid short circuits on batteries.
- Perfect Build for DIY battery packs