Showing 457–480 of 513 results
Filter by price
Batteries & Power Supply
PL401223GH 3.85V 130mAH for Bluetooth handset Battery
₹177.00 (Inc. GST)₹150.00 (+18% GST Extra)
Specifications:
- Voltage: 3.85V
- Capacity: 130mAh
- Approx Size: 23x12x4 (mm)
Precision 5V 700mA (3.5W) Isolation Power Supply Module AC-DC Step- Down Module 220V to 5V
₹89.00 (Inc. GST)₹75.42 (+18% GST Extra)
Specification:
- Input Voltage: 220VAC
- Output Voltage: 5 VDC.
- Output Power: 3.5W.
- Output overload and short circuit protection.
QC2.0 DC-DC Buck Converter Charging Step down module 6-32v 9v 12v 24v to fast Quick charger circuit board 3v 5v 12v
₹399.00 (Inc. GST)₹338.14 (+18% GST Extra)
Specification :Â
- Â Input voltage: 6V-32V
- Â Output voltage: default 5V, automatically adjust between 3-12V after triggering fast charge
- Â Output power: up to 24W (5V/3.4A, 9V/2.5A, 12V/2A, etc.)
- Â Output voltage cable compensation function
- Â Conversion efficiency: 90%-97%
- Â Support multiple fast-charging protocols
- Â Input overvoltage and under-voltage protection
- Â Input overcurrent protection
- Â Output overcurrent, short circuit protection
- Â Machine over temperature protection
QC4.0 QC3.0 USB Type-C 6-35 V Step Down Buck Module SW3516
₹578.20 (Inc. GST)₹490.00 (+18% GST Extra)
Specifications :
- Input voltage range: 6V to 35V
- Output voltage:Â 5V
- Conversion efficiency: 90% to 97%
- Dimension:50x20x11 mm
QC4.0 QC3.0 USB Type-C 6-35 V Step Down Buck Module SW3518
₹702.10 (Inc. GST)₹595.00 (+18% GST Extra)
Specifications :
- Input voltage range: 6V to 35V
- Output voltage:Â 5V
- Conversion efficiency: 90% to 97%
- Dimension:50x20x11 mm
Raspberry Pi Accessory, Raspberry Pi 4 Model B Official PSU, USB-C, 5.1V, 3A, UK Plug, White
₹749.01 (Inc. GST)₹634.75 (+18% GST Extra)
- Good Quality material
- 96-230Vac operating input range
- 50,000 hours MTBF
- 6-month warranty.
- Input Current: 0.5A maximum
- Input Power consumption (no load): 0.075W maximum
- USB-C connection goes straight into your Raspberry Pi
Refurbished 11.1V 2600mAh 18650 3S 1C Li-ion Battery Pack with BMS
₹465.25 (+18% GST Extra)
Specifications:
- Voltage: 11.1V
- Over Charger Protection
- Max Discharge Current : 2.5A
- Full charge voltage 12v
- Maximum discharge voltage: 9V
Roofer 3.7V 2600mAH 3C Cell For EV Battery
₹194.70 (Inc. GST)₹165.00 (+18% GST Extra)
Specification :
- Nominal Capacity: 2600 maH
- Nominal Voltage: 3.7V
- Discharge Rating: 3C
- Form Factor: 18650
- Life cycle: 1000 Cycles
Signal Amplifier AD620 Microvolt/Millivolt Amplifier Signal Booster Amplifier 100μV-300mV Input Low Volt Amp Module Signal Transmitter Board
₹256.01 (Inc. GST)₹216.95 (+18% GST Extra)
TECHNICAL SPECIFICATIONS:
- Power Requirement : 3.5-10V (VIN pin)
- Â Current : Max Sink Current 20mA, Max Source Current : Â 30mA
- Bandwidth : Gain = 100 , 120kHz
-  Input Signal  Range :  100uV – 300mV
- Â Input Signal Type : AC or DC
-  Amplification  Range :  1.5 – 1000x
-  Output Voltage  Max :  VIN – 2V
- Â Offset Voltage Typical / Max :Â 30uV / 125uV
- Â Input Bias Current Typical / Max : 0.5nA / 2.0nA.
- Â Offset Voltage Drift Max : 1uV / degree
- Common Mode Rejection Ratio Gain = 10 : 100dB
- Dimensions : CB (L x W) 32 x 22mm (1.3 x 0.87″)
Single Hole Electrical Insulating Adhesive Mat for 18650 Battery Cell Terminal Insulation – 120 Pcs
₹141.60 (Inc. GST)₹120.00 (+18% GST Extra)
Specifications:
- Material: Adhesive cardboard paper for battery insulators
- Size: Outer ring diameter:17mm/0.67″;Inner ring diameter:10mm/0.39″;Thickness:0.25mm/0.01″
- Advantage: Safe and stable, better protection to avoid battery shorts
- Package: Including 120pcs battery ring insulator adhesive paper
- Better protection to avoid short circuits on batteries.
- Perfect Build for DIY battery packs!
Single Hole Electrical Insulating Adhesive Mat for 21700 Battery Cell Terminal Insulation – 1 Sheet ( 80 Pcs)
₹70.80 (Inc. GST)₹60.00 (+18% GST Extra)
Specifications:
- Material: Adhesive cardboard paper for battery insulators
- Size: Outer ring diameter: 20 mm
- Inner ring diameter: 10 mm
- Thickness: 0.25mm
- Advantage: Safe and stable, better protection to avoid battery shorts
- Package: Including 120pcs battery ring insulator adhesive paper
- Better protection to avoid short circuits on batteries.
- Perfect Build for DIY battery packs
Single Hole Electrical Insulating Adhesive Mat for 32650 Battery Cell Terminal Insulation – 1 Sheet ( 40 Pcs)
₹41.30 (Inc. GST)₹35.00 (+18% GST Extra)
Specifications:
- Material: Adhesive cardboard paper for battery insulators
- Size: Outer ring diameter:32 mm –
- Inner ring diameter: 16 mm
- Thickness: 0.25mm
- Advantage: Safe and stable, better protection to avoid battery shorts
- Package: Including 120pcs battery ring insulator adhesive paper
- Better protection to avoid short circuits on batteries.
- Perfect Build for DIY battery packs
SKYRC B6 Nano 320W 15A DC Smart Battery Charger Discharger
₹6,797.98 (Inc. GST)₹5,761.00 (+18% GST Extra)
Specification:
- SCAN TO GO
- Capacitive Touch Button
- Smart & Efficient Cooling System
- No more scrolling through complex menu, what you see is what you need
- Powerful and High Speed Micro Controller
SKYRC E3 AC 2S~3S Li-Po Battery Balance Charger (V2)
₹1,349.92 (Inc. GST)₹1,144.00 (+18% GST Extra)
Specification:
- Version 2.0.
- Input: AC 110V-240V AC.
- Dimension approx: 88 X 57 X 35mm.
- Cell count range: 1-3 cells.
- Max Charge Current: 1.2 A.
- Operational mode display: via 3 LEDs.
SkyRC iMAX B6 Mini Professional Balance Charger/Discharger (Original)
₹3,350.02 (Inc. GST)₹2,839.00 (+18% GST Extra)
Specifications:
- Lithium battery meter
- Battery internal resistance meter
- Re-Peak mode for NiMH/NiCd battery
- Terminal voltage control
- PC control & firmware upgradable
- Smartphone control & monitor
SkyRC IMAX B6AC V2 Professional Balance Charger/Discharger
₹4,689.32 (Inc. GST)₹3,974.00 (+18% GST Extra)
Specification:
- PC connectivity
- Microprocessor controlled
- Delta-peak sensitivity
- Individual cell balancing
- Li-ion, LiPo, and LiFe capable
- Ni-Cd and NiMH capable
- Time limit function
- Input voltage monitoring (Protects car batteries at the field)
- Data storage (5 pack memory)
- Battery break in and cycling
SkyRC Temperature Control Sensor Cable For B6 / B6ac Lipo Battery Charger
₹429.04 (Inc. GST)₹363.60 (+18% GST Extra)
Specification:
- Temperature range: 0℃-80℃
- Wire length: 45cm
- Velcro length: 22cm
- Material: Composite Material Plastic
SX1308 DC-DC Step Up Adjustable 1.2Mhz Power Booster Module 2-24V to 2-28V 2A
₹44.84 (Inc. GST)₹38.00 (+18% GST Extra)
Specifications:
- Efficiency at the 1.2MHz oscillation frequency reaches 95%.
- The circuit features functions to control the output voltage
- Â AÂ 10k potentiometer to adjust for overheating, and short circuit safety.
- Maximum input voltage:DC 2-24V
- Maximum output voltage:DC 2-28V
- Switching frequency: 1.2MHz
- Maximum current output: 2A
- PCB Size ( L x W ) mm: 24 x 16
- Height (mm): 14
Three Plug Power Keystone Jack
₹105.94 (Inc. GST)₹89.78 (+18% GST Extra)
Specifications:
- Name: Three Plug Power Keystone Jack
- Rated: 230V
- Current : 5A
- Color: black
- Spe : E-Type
- Gender : Female
Tomo V6-2 Dual Usb 2 Slots Battery Intelligent Charger For AA / AAA / 18650 / 17650 / 16340 / 14500 / 10500 Batteries Black
₹448.00 (Inc. GST)₹379.66 (+18% GST Extra)
As for rechargeable batteries, a battery charger is a must-have. Here is our TOMO V6-2 Dual USB 2 Slots Battery Charger! Extremely environmentally friendly and energy-saving, our battery charger is great for daily use.
Features:
- USB to Connect to the Power supply.
- Super portable, great for home or travel use.
- Indicators for Charging (Red) and Battery Full (Green).
- With two slots for two batteries charging separately.
TP4056 1A Li-ion lithium Battery Charging Module with Current Protection – Mini USB BMS
₹23.60 (Inc. GST)₹20.00 (+18% GST Extra)
Specifications:-
- Input interface: Mini USB.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.2V.
- Full charge voltage: 4.2V.
- Battery over-current protection: 3 A
- The battery Undervoltage protection:Â 2.5 V
TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C
₹17.50 (+18% GST Extra)
Specification:
- Dimension: 25 x 19 x 10 (LxWxH)mm.
- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
TP4056 Module 1.2 A Li-Ion Battery Charging Board Micro USB with Current Protection
₹16.00 (+18% GST Extra)
Specifications:Â
- No MOSFET, Sense Resistor or Blocking Diode Required
- Complete Linear Charger in SOP-8 Package for Single Cell Lithium-Ion Batteries
- Constant-Current/Constant-Voltage Charges Single Cell Li-Ion Batteries Directly from USB Port
- Preset 4.2V Charge Voltage with 1.5% Accuracy
- Two Charge Status Output PinsC/10 Charge Termination
- 2.9V Trickle Charge Threshold (TP4056)
- Soft-Start Limits Inrush Current
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Lion Battery Compatible 2A Charging Board
₹53.11 (+18% GST Extra)
Features:
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
-
Double 8.4v / 4.2v lithium rechargeable single .
-
Programmable charge current. 0. 1A-2A .
-
Programmable steady pre-charge current 10% -100%.
-
Wide operating voltage, maximum reach I8V.
-
Red and green LED charge status indicator.
-
Chip temperature protection, overcurrent protection, under voltage protection.
-
Battery temperature protection, reverse battery shutdown, short circuit protection.
-
Switching frequency 400Khz, usable inductance 20uH and more.
-
PWR_ON Power battery for switching control.