Showing 109–126 of 130 results
MS 4S 14.4V 15A MOS 18650 Lithium Battery Charging Protection Board
Specification :
- Charging current: 2A
- Discharge current: 15A
- Overcharge protection current: 7A+/-2A
- Over-discharge protection current: 28A+/-3A (adjustable)
- Overcharge protection voltage: 4.25V+/-25MV (any string)
- Over-discharge protection voltage: 2.7V+/-80MV (any string)
- Colour: Green
- Material: PCB
Ni-Cd AA 1800mAh 1.2V Rechargeable Battery
Ni-Cd AA 1800mAh 1.2V Rechargeable Battery ( Flat Head )
NI-MH AA 1300mAh 1.2V Rechargeable Battery
Refurbished 11.1V 2600mAh 18650 3S 1C Li-ion Battery Pack with BMS
Roofer 3.7V 2600mAH 3C Cell For EV Battery
Single Hole Electrical Insulating Adhesive Mat for 18650 Battery Cell Terminal Insulation – 120 Pcs
Specifications:
- Material: Adhesive cardboard paper for battery insulators
- Size: Outer ring diameter:17mm/0.67";Inner ring diameter:10mm/0.39";Thickness:0.25mm/0.01"
- Advantage: Safe and stable, better protection to avoid battery shorts
- Package: Including 120pcs battery ring insulator adhesive paper
- Better protection to avoid short circuits on batteries.
- Perfect Build for DIY battery packs!
Single Hole Electrical Insulating Adhesive Mat for 21700 Battery Cell Terminal Insulation – 1 Sheet ( 80 Pcs)
Specifications:
- Material: Adhesive cardboard paper for battery insulators
- Size: Outer ring diameter: 20 mm
- Inner ring diameter: 10 mm
- Thickness: 0.25mm
- Advantage: Safe and stable, better protection to avoid battery shorts
- Package: Including 120pcs battery ring insulator adhesive paper
- Better protection to avoid short circuits on batteries.
- Perfect Build for DIY battery packs
Single Hole Electrical Insulating Adhesive Mat for 32650 Battery Cell Terminal Insulation – 1 Sheet ( 40 Pcs)
Specifications:
- Material: Adhesive cardboard paper for battery insulators
- Size: Outer ring diameter:32 mm -
- Inner ring diameter: 16 mm
- Thickness: 0.25mm
- Advantage: Safe and stable, better protection to avoid battery shorts
- Package: Including 120pcs battery ring insulator adhesive paper
- Better protection to avoid short circuits on batteries.
- Perfect Build for DIY battery packs
TP4056 1A Li-ion lithium Battery Charging Module with Current Protection – Mini USB BMS
TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C
TP4056 Module 1.2 A Li-Ion Battery Charging Board Micro USB with Current Protection
Specifications:Â
- No MOSFET, Sense Resistor or Blocking Diode Required
- Complete Linear Charger in SOP-8 Package for Single Cell Lithium-Ion Batteries
- Constant-Current/Constant-Voltage Charges Single Cell Li-Ion Batteries Directly from USB Port
- Preset 4.2V Charge Voltage with 1.5% Accuracy
- Two Charge Status Output PinsC/10 Charge Termination
- 2.9V Trickle Charge Threshold (TP4056)
- Soft-Start Limits Inrush Current
TP5100 4.2v 8.4v Single Double Lithium Battery Charge Management Lion Battery Compatible 2A Charging Board
Features:
- Input voltage: 5-15V DC power supply.
- Charge status: full and unloaded blue lights, charging red.
-
Double 8.4v / 4.2v lithium rechargeable single .
-
Programmable charge current. 0. 1A-2A .
-
Programmable steady pre-charge current 10% -100%.
-
Wide operating voltage, maximum reach I8V.
-
Red and green LED charge status indicator.
-
Chip temperature protection, overcurrent protection, under voltage protection.
-
Battery temperature protection, reverse battery shutdown, short circuit protection.
-
Switching frequency 400Khz, usable inductance 20uH and more.
-
PWR_ON Power battery for switching control.
Type-C USB 2S BMS 15W 8.4V 12.6V 1.5A Lithium Battery Charging Boost Module With Balanced Support Fast Charge With Indicator
Type-C USB 3S BMS 15W 8.4V 12.6V 1.5A Lithium Battery Charging Boost Module With Balanced Support Fast Charge With Indicator
Ultrafire BRC 18650 3.7V 6000mAh Battery Lithium Ion
Specifications:
- Material: Lithium-ion
- Battery Type: Flat head
- Actual battery capacity: 6000 mAh
- Voltage: 3.7V
- Battery can be recycled
- Charging time is about 7 hours
- Can charge about 1200 times
- Battery Size: 6.6 x 1.8 x 1.8 cm
- Cut-off Voltage: 2.5B
- Internal Impedance: ≤ 180 Milli-Ohms
- Cycle Performance: 90% of initial capacity at 400 cycles
- Charging Current: 0.5C (~1500mA) Voltage = 4.2 V End Current = 0.01 mA
- Discharging Current: 0.5C (~1500mA) End Voltage = 3.0V
- Â Dimensions:
- Diameter: 18.6+/-0.2 mm
- 66.5+/- 0.2mm
- Weight: 48g
WeMos D1 Lithium Battery Charger Board with Mini USB
