Showing 19–36 of 88 results
2S 3A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module
2S 5A 8.4V 18650 Lithium Battery Charger Board Protection Module
3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
Specifications :
- 3S 11.1V 12.6V 20A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 20A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power below 135W
3S 100A LiFePO4 Lithium Battery Protection Balance Charging BMS Protection PCB Board-White
3S 10A 11.1V 18650 Lithium Battery Charger Board Protection Module
Specifications:
-
Size: approx. 50x16x1mm
-
Maximum discharge current: 10A
-
Overcharge detection voltage: 4.25-4.35V±0.05V
-
Over-discharge detection voltage: 2.3-3.0V±0.05V
-
Maximum working current: 5A-8A
-
Transient current: 9A-10A
-
Operating temperature: -40~50°
-
Storage temperature: -40~80°
-
Quiescent current: ＜6uA
-
Internal resistance: ＜60mΩ
-
Service life: ＞30,000 hours
3S 12V 25A 18650 Lithium Battery Protection Board
Specification:
- Operating current: 0 – 25A.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current: less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life: more than 30000 hours.
- Size: about 56mm*45mm*1.2mm
- Over voltage range: 4.25-4.35v±0.05v
- Over discharge voltage range: 2.3-3.0v±0.05v
- Maximum operating current: 0-25A
- Maximum transient current: 34-40A
- Quiescent current: less than 30uA
- Internal resistance: less than 100mΩ
- Working temperature: -40---+50°
- Storage condition: -40-- +80°
- Effective life: more than30000h
- Short circuit protection: Yes, delayed self recovery
3S 15A 18650 Lithium Battery Protection Board
3s 30A 18650 Lithium Battery Protection Board
3S 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module
4 x 18650 Lithium Battery Shield V8 V9 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266
4S 100A LiFePO4 Lithium Battery Protection Balance Charging BMS Protection PCB Board-White
Specification:
- Single cell battery overcharge protect voltage : 3.61-3.69 V
- Single cell battery overcharge protect recover voltage : 3.5-3.6V
- Overcharge protect delay : 1.5-2.5S
- Single cell battery over-discharge protect voltage : 2.27-2.43 V
- Single cell battery over-discharge protect recover voltage : 2.45-2.65 V
- Overcharge protect Current : 100A
- Over-discharge protect Current : 100A
- Over-discharge protect delay : 0.5-1.5S
- Temperature protect : Yes,have Temperature control interface.
- Disconnect protect : Yes
- Shortage protect : Yes
- Shortage delay : 100-600 uS
- Shortage protect recover mode: Off load release.
- Contact discharge current:80A
- Synopline discharge current:60A
- Charging current:60A
- Balance function:yes
- Ampere balance (Current) : 50MA
- Voltage alance accuracy : 3.355-3.455 V
4S 10A 18650 Lithium Battery Protection Boad
4S 14.8V 10A BMS Li-ion 18650 Battery Protection Board
Specifications :
- Over charge protection voltage : 4.225±0.050 V
- Over charge recovery voltage : 4.125±0.050 V
- Over charge protection delay time : 1S
- Continuous Discharge Current :10A
- Over discharge protection voltage : 2.70±0.050 V
- Over discharge recovery voltage : 3.00±0.050 V
- Over discharge protection delay time : 1S
- Over current protection current : 14A
- Short circuit delay time : 300uS
- PCM Size : 35 mm * 35 mm.
4S 14.8V 18650 Lithium Battery Equalization Board
