Showing 37–45 of 123 results
Filter by price
Motor Drivers
Bluesky Mini 5V 3A FPV Gimbal PTZ UBEC for RC Air Models
₹194.70 (Inc. GST)₹165.00 (+18% GST Extra)
Specifications :
- Special for FPV image transmission
- Provide two version to choose: 5V
- Suitable for: RC Air Plane
- Output current: Constant 3A
- Output voltage: 2-6S( 5V version )
Brushless Motor Controller DC 12-36V 500W PWM Driver Board with Hall Sensor
₹1,138.99 (Inc. GST)₹965.25 (+18% GST Extra)
Specifications:
- Drive plate type: JYQD_V6.3E2
- Voltage range: 12V-36V.
- Peak current: 20A.
-
PWM speed control: PWM frequency 1-20KHZ.
-
Duty cycle: 0-100%
- Drive power: ≤ 500W (related working voltage).
CCM5D Digital PWM DC Motor Speed Controller With Display
₹328.04 (Inc. GST)₹278.00 (+18% GST Extra)
Specifications:
- Built-In Display for The Duty Cycle
- Operating Voltage: 6-24 VDC
- Operating Current: up to 8A
- Material: ABS
Cellmeter 8 Multi-Functional Digital Power Servo Tester
₹748.12 (Inc. GST)₹634.00 (+18% GST Extra)
Specifications:
- Balance Discharge Current: 90mA × 8 Cell (Max@Cell Voltage 4.2v)
- Servo Test Frequency: 50Hz, 60Hz, 100Hz, 125Hz, 200Hz, 250Hz, 300Hz,
- Battery Voltage Test Precision: 0.001V
- Support Battery Type:Â Can test Li-Po, Li-ion, Li-Fe (2-8S), NiCd, NiMH(4-8S) battery
CNC 4 Axis Controller DSP Controlled – TB6560 Stepper Motor
₹5,900.00 (Inc. GST)₹5,000.00 (+18% GST Extra)
Features:
- High performance, cost-effective.
- Automatic idle-current reduction.
- Supply voltage up to 45V DC.
- Output current up to 5.0A.
- Suitable for 2-phase and 4-phase motors.
- High speed optoelectronic isolation signal input.
- Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
- 1, 2, 4, 8, 16 adjustable microstep control, motors run more precisely and smoothly.
- Overload, overcurrent, overheat, overvoltage and undervoltage protection to avoid damaging your computer and devices.
- Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency.
- With one 0 ~ 10V PWM Signal output port for speed adjustment and one Relay output port.
- 5 types of input control in manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc..
Cyclone 35A 2-6S Blheli_S DSHOT600 OPTO Brushless ESC for RC Drone FPV Racing
₹979.96 (Inc. GST)₹933.30 (+5% GST Extra)
Specifications:
- Programmable PWM frequency of up to 48KHz
- Power supply: 2-6S (7.4-16.8V)
- Continuous current: 25A
- Burst current: 35A (5S)
- Auto-timing for higher efficiency and reliability
Cytron 20Amp 6V-30V DC Motor Driver MD20A
₹3,159.00 (Inc. GST)₹2,677.12 (+18% GST Extra)
Specifications:
- Bidirectional control for one brushed DC motor.
- Operating Voltage: DC 6V to 30V
- Maximum Motor Current: 20A continuous, 60A peak
- Buttons for quick testing.
- LEDs for motor output state.
- Overcurrent protection with active current limiting.
- Temperature protection.
- Undervoltage shutdown.
Cytron 30Amp DC Motor Driver (Peak 80Amp) MD30C R2
₹3,044.40 (Inc. GST)₹2,580.00 (+18% GST Extra)
Specification:
- One Motor Channel
- Compatible Input: 3.3 to 5V
- Operating Voltage: 5 to 25 (Rev 1.0) , 5 to 30 (Rev 2.0 )
- Peak Current (A):80 (1 second)
- Continuous Current (A):30
- Operating Modes: Arduino,PWM
- On board Speed control
- LEDs Indicator
- Manual Button
Cytron Enhandced 13Amp DC Motor Driver 30A Peak (10 Seconds) MD10C
₹939.80 (+18% GST Extra)
Specifications:
- DC Brushed motor (Two terminals)
- Operating voltage from 5V to 30V
- Rated Current <= 13A
- Peak Current <= 30A