Showing 37–48 of 176 results
AMS1117-3.3V, 1A, SOT-223 Voltage Regulator IC (Pack of 5 ICs)
AMS1117-ADJ 1A 5V, Voltage Regulator IC (Pack of 5 ICs)
AO3400 30V 5.8A N-Channel MOSFET SOT-23 (Pack of 5)
AT89S52-24PU DIP-40 Microcontroller
Specification:
- Package/Case: DIP-40
- 8K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 256 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Three 16-bit Timer/Counters
- Eight Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
ATmega 16A-PU PDIP-40 Microcontroller
Specifications :
- Advanced RISC Architecture.
- 32 x 8 General Purpose Working Registers.
- Fully Static Operation.
- Up to 16 MIPS Throughput at 16 MHz.
- Advanced RISC Architecture.
- On-chip 2-cycle Multiplier.
- High Endurance Non-volatile Memory segments.
- 16 Kbytes of In-System Self-programmable Flash program memory.
- 512 Bytes EEPROM.
- 1 Kbyte Internal SRAM.
- Write/Erase Cycles: 10,000 Flash/100,000 EEPROM.
- Optional Boot Code Section with Independent Lock Bits.
- In-System Programming by On-chip Boot Program.
- True Read-While-Write Operation.
- Programming Lock for Software Security.
- JTAG (IEEE std. 1149.1 Compliant) Interface.
- Boundary-scan Capabilities According to the JTAG Standard.
- Extensive On-chip Debug Support.
- Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface.
- Peripheral Features.
- Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes.
- One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode.
- Real Time Counter with Separate Oscillator.
- Four PWM Channels.
- 8-channel, 10-bit ADC.
- 8 Single-ended Channels.
- 7 Differential Channels in TQFP Package Only.
- 2 Differential Channels with Programmable Gain at 1x, 10x, or 200x.
- Byte-oriented Two-wire Serial Interface.
- Programmable Serial USART.
- Master/Slave SPI Serial Interface.
- Programmable Watchdog Timer with Separate On-chip Oscillator.
ATmega 32A-AU / ATmega32A U-TH (SMD Package) TQFP-44 PIN Microcontroller
Features:
- Advanced RISC architecture
- 131 Powerful instructions
- Fully static operation
- Up to 16MIPS throughput at 16MHz
- On-chip 2-cycle multiplier
- High endurance non-volatile memory segments
- Optional boot code section with independent lock bits
- In-system programming by the on-chip boot program
- True Read-While-Write operation
- Programming lock for software security
Atmega328 U IC Micro-controller
Specifications:
- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general-purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
ATmega328P AU TQFP-32 Microcontroller
ATmega328P U-TH Microcontroller
Atmega328P-U IC Micro-controller
Specifications:
- 131 powerful instructions – Most Single Clock Cycle Execution
- 32 x 8 general-purpose working registers
- Fully static operation
- Up to 20MIPS throughput at 20MHz
- On-chip 2-cycle multiplier
- Write/erase cycles: 10,000 flash/100,000 EEPROM
- Optional boot code section with independent lock bits
- In system programming by on-chip boot program
- True read while write operation
- Programming lock for software security
- Two 8-bit timer/counters with separate prescaler and compare mode
- One 16-bit timer/counter with separate prescaler, compare mode, and capture mode
- Real-time counter with separate oscillator
ATMega32A Microcontroller IC
Features:
- Advanced RISC architecture
- 131 Powerful instructions
- Fully static operation
- Up to 16MIPS throughput at 16MHz
- On-chip 2-cycle multiplier
- High endurance non-volatile memory segments
- Optional boot code section with independent lock bits
- In-system programming by the on-chip boot program
- True Read-While-Write operation
- Programming lock for software security
ATmega8A AU TQFP-32 Microcontroller
Features:
- Advanced RISC architecture – On-chip 2-cycle multiplier
- High endurance, non-volatile memory segments
- QTouch® library support – Capacitive touch buttons, sliders, and wheels
- Peripheral features – Byte-oriented Two-Wire serial interface
- Power-on reset (POR) and programmable brown-out detection
- Internal Calibrated RC oscillator
- External and internal interrupt sources
- Five sleep modes – Idle, ADC noise reduction, power-save, power-down, and standby