Showing 46–54 of 105 results
ICSP Universal Socket
₹365.80 (Inc. GST)₹310.00 (+18% GST Extra)
Overview:
Cytron has created this UIC-A so that users can use any programmer regardless of the development board. For example, a development board that uses PICkit2’s socket standard, which is 6-way header pins can be programmed with UIC000B by using the UIC-A!
IIC/I2C Serial Interface Adapter Module – Compatible with 1602 LCD & 2004 LCD
₹58.42 (Inc. GST)₹49.50 (+18% GST Extra)
Specifications:
- IC Chip:Â PCF8574
- Power Supply: 5V
- Serial I2C control of LCD display using PCF8574
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers) address, allowing
- Size: 41.6 x 19.2 mm
- Compatible with Arduino Boards, Raspberry piÂ
LAN8720 Ethernet Network Module Transceiver RMII Interface Development Board
₹289.00 (Inc. GST)₹244.92 (+18% GST Extra)
Specifications:
- High-Performance 10/100 Ethernet Physical Layer Transceiver (PHY)
- Supports single 3.3V supply
- Supports the reduced pin count RMII interface
- Supports HP Auto-MDIX
- Onboard chip package: 24-pin QFN (4×4 mm) Lead-Free RoHS Compliant package
- Flexible Power Management Architecture
- Integrated 1.2V regulator
- I/O voltage range: +1.6V to +3.6V
MAX485 TTL To RS485
₹28.01 (Inc. GST)₹23.73 (+18% GST Extra)
Specifications :
- Operating voltage: 5V
- On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver.
- A low power consumption for the RS-485 communication
- Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring.
- All pins of the chip have been lead to can be controlled through the microcontroller.
- Convenient RS-485 communication wiring
- Multiple Units can be connected to the same RS-485 bus wiring.
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino
Original price was: ₹165.20.₹159.00Current price is: ₹159.00. (Inc. GST)₹134.74 (+18% GST Extra)
Specifications :
- Input Supply voltage: 5V
- Input Supply Current: 5 mA
- Communication Rate: 1 Mbps
- Support CAN V2.0B technical standard, communication rate 1Mb / S.
- 0 to 8 bytes long data field.
- Use High-speed CAN transceiver TJA1050
- SPI control for expanding Multi CAN bus interface
- Use serial port could view the communication data
- With the independent key, LED indicator, Power indicator
- With power pin
- Positioning screw hole center spacing 23 mm x 38 mm
- The working current: typical 5mA, standby current 1 microamp. Except for the power indicator.
MiNi ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC
₹549.88 (Inc. GST)₹466.00 (+18% GST Extra)
- Fully Compatible with 10/100/1000Base-T Networks
- Integrated MAC and 10Base-T PHY
- Supports One 10Base-T Port with Automatic Polarity Detection and Correction
- Supports Full and Half-Duplex modes
- Programmable Automatic Retransmit on Collision
- Programmable Automatic Rejection of Erroneous Packets
- SPI Interface with Clock Speeds Up to 20 MHz
- For Arduino, SPI, AVR, PIC, LPC, STM32.
Mini HDMI2VGA UP Scaler 1080P HD Video Converter Media Streaming Device
₹389.40 (Inc. GST)₹330.00 (+18% GST Extra)
Specifications:
- High-Quality HDMI Adaptor
- Colour: White
- Input HDMI.
- Output: VGA.
Mini USBISP USBASP Programmer Aluminum for 51 single chip AVR WIN7 64
₹454.30 (Inc. GST)₹385.00 (+18% GST Extra)
Specifications:
- USBASP Board
- Mini size, with cover
- Support USB 1.0 or 2.0 interface
- Support S51 and the AVR chip programmer. fast and stable
- Standard IDC 10PIN interface
- Support software: AVR_FIGHTER, Progisp1.72
New ESC USB Linker Programmer For Simonk BLHeli Firmware SN/BL/16A/20A/30A/40A
₹528.64 (Inc. GST)₹448.00 (+18% GST Extra)
Features:
- Direct plug design, works with most USB port and USB extension cable
- Â Low power consumption design
- Onboard 2×3 Pin AVR ISP port
- Â 3pin servo connector can be used as servo or C2 connection
- Supports SIMONK and BLHELI ESC, KKflashtool compatible
- KKflashtool and RapidFlash compatible
- Silabs CP2102 Driver chip! (Win, Mac, Linux)
- Software upgradeable (via Arduino or BLHELISUIT)
- Pre-load as BLHELISUIT 4w-if 14.1 firmware