Showing 61–72 of 105 results
PL2303 USB To TTL(Serial) Converter Module
Specifications :Â
- Adopt imported controller PL2303HX, which can stabilize the flash with high speed
- 500mA self-recovery fuse for protection.
- Two data transmission indicator can monitor data transfer status in real time.
- Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power.
- The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside.
- The electrostatic package ensures the board will not be damaged before use.
- Support WIN7 system.
PL2303HXD 6Pin USB TTL RS232 Convert Serial Cable
Specifications:
- Input Supply voltage: 3.3.~ 5 V
- Connector type: USB To TTL RS232
- Cable length: 80 Cm
- Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps
- Compatible with the RS422/RS485 interface
- The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
- It is USB 2.0 full speed compatible. The USB side of the cable is USB powered.
PoE Splitter Power Over Ethernet Adapter Active 48V to 12V
Specifications:
- Output port adapter: RJ45 male and male DC jack 5.5*2.1mm
- Data rate: 10/100Mbps
- Power Input: DC48V
- Power Output: DC12V 2A
- Data Output Port: RJ45 Male
- Devices will be detected before poe input.
RS-232 RS232 to RS-485 RS485 Interface Serial Adapter Converter
RS232 Serial DB9 Pin Female to USB 2.0
Specifications:
- Full compliant with the USB2.0/1.1 standard
- Supports the RS232 Serial interface
- Supports automatic handshake mode
- Over 1Mbps data transfer rate
- Supports Remote wake-up and power management
- Transfers your RS232 device to a USB device
- Support WINDOWS 98/ME/2000/XP/Server 2003/VISTA / Server 2008/Win7 32 bits through Microsoft digital signature authentication
RS232 to RS485 serial port Data Interface Adapter Converter
Specification:
- Data Transfer Rate: 300-115200bps . Operating Distance: 1200m for RS485, 5m for RS232
- Transmission media: Twisted-pair or shielded twisted pair (STP).
- Power: None required, uses TD as power source ,environment: -10C to 85C, 5% to 95% RH
- Interface: Compatible with EIA/TIA RS-232C standard and RS-485 standard.
- Make: HXID & HEXIN
- Working mode: Asynchronous, half-duplex, differential transmission.
RS232 To TTL Serial Converter Module
Specifications:
- IC Chip: MAX3232
- Operating Voltage: 3.3-5.5V
- Operates up to 250 kbit/s
- Power supply: external dc
- interface: TXD, RXD, GND, VCC
- Dimensions: 33mm*32mm*16mm
RS232 To TTL Serial Converter Module With DB9 Connector – 8 Pin
RS232 to TTL Serial Port Converter Adapter Communication Module
Features:
- It is widely used in radio modification, phone flash, XBOX360 flash, GPS, vehicle detection, DVD flash, and hard disk repair set-top box upgrade.
- It can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU.
- Pre-assembled compact-size board.
- Suitable for use with most microcontrollers.
- Operates up to 250 kbit/s.
SCM TTL to RS485 Module, 485 to Serial UART
Specifications:-
- Operating Voltage (VDC):3 ~ 30
- Compatible Signals:3.3V and 5.0V
- Working Temperature Range (°C):-40 to 85
- Baud Rate:110 to 256000bps
- Support multi-machine communication, at least 40 nodes can be connected to the same network
- can be hot-swapped and there will be no signal thrombosis.
- With standard 2.54 pitch pin headers
Silicon Labs CP210x USB To RS232 9Pin D-sub DB9 Serial Converter
Specifications:
- CP2102 Based - Better and Faster than Cheap PL2303 based boards
-
USB specification 2.0 compliant with full-speed 12Mbps.
-
Supports all Windows (Above Win98), Mac OS (Above 9) & Linux (Above 2.x.x)
-
Baud rates:Â 300 bps to 1 Mbps.
-
Byte receives buffer: 640 byte transmit buffer.
- Create a virtual COM port and connect your old devices that use serial port communication
- Compatible with both 3.3V & 5V levels
- LED indication (ON only when the port is opened and being used, otherwise OFF)
- Temperature Range:Â -40 to +85.
