Showing 13–24 of 31 results
Leonardo R3 Board Micro-USB compatible with Arduino
₹698.99 (Inc. GST)₹592.37 (+18% GST Extra)
Specifications:
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
Mega +WiFi R3 Atmega2560+NodeMCU ESP8266 32Mb Memory USB-TTL CH340G Compatible For Arduino Mega
Original price was: ₹1,749.99.₹1,486.80Current price is: ₹1,486.80. (Inc. GST)₹1,260.00 (+18% GST Extra)
Specifications:
- Microcontroller:ATmega2560
- IC Wi-Fi : ESP8266
- USB-TTL converter: CH340G
- Power Out: 5V-800mA
- Power Input USB: 5V (500mA max.)
- Power Input VIN/DC Jack: 9-24V
- Power Consumption: 5V 800mA
- Logic Level: 5V
- Wi-Fi 802.11 b/g/n 2.4 GHz
- USB: Micro USB
- Clock Frequency: 16MHz
- Operating Supply Voltage: 5V
- Digital I/O: 54
- Analog I/O: 16
- Memory Size: 256kb
- Data RAM Type/Size: 8Kb
- Data ROM Type/Size: 4Kb
- Interface Type : SerialOTA
- Operating temperature :−40С°/+125С°
- Dimensions:53.361×101.86mm
- Buil-inexternal antenna
Mega2560 Pro ATMEGA2560-16AU USB CH340G Development Board
₹1,008.00 (Inc. GST)₹854.24 (+18% GST Extra)
Specifications:
- The board is compatible with Mega 2560.
- excellent solution for developing projects based on ATmega2560.
- The board can be powered directly through the Micro USB connector
- The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
₹253.70 (Inc. GST)₹215.00 (+18% GST Extra)
Specifications:
- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Original Arduino Mega 2560 ATmega2560 MCU Rev3
₹3,369.00 (Inc. GST)₹2,855.08 (+18% GST Extra)
- Manufacturer: Arduino Official
- Official Arduino Board with 3-Month brand Warranty
- ATmega16U2 instead 8U2 as USB to serial converter
- Stronger RESET circuit
- 5V operating voltage
- 40mA DC current per I/O pin
- 256KB flash memory of which 8KB used by bootloader
- 8KB SRAM
- 4KB EEPROM
Original Arduino MKR Wi-fi 1010 Board
₹3,481.00 (Inc. GST)₹2,950.00 (+18% GST Extra)
Features:
- Digital I/O Pins: 8
- PWM Pins: 12
- Flash Memory: 256 KB
- SRAM: 32 KB
- Microcontroller: SAMD21 Cortex-M0+ 32-bit low-power ARM MCU
- Board Power Supply (USB/VIN): 5V
- Full-speed USB device and embedded host
- Pre-mounted headers with pin-out
Original Arduino Nano
₹1,975.01 (Inc. GST)₹1,673.73 (+18% GST Extra)
Specification:
- Manufacturer: Arduino Officials
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Original Arduino Nano 33 IOT
₹2,685.00 (Inc. GST)₹2,275.42 (+18% GST Extra)
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Radio module: u-blox NINA-W102
- Secure Element: ATECC608A
- IMU: LSM6DS3
- Clock Speed: 48MHz
- Operating Voltage: 3.3V
Original Arduino Uno R3
₹1,918.68 (Inc. GST)₹1,626.00 (+18% GST Extra)
Specifications:
- Microcontroller: ATmega328
- Operating Voltage : 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) : 6-12V
- Digital I/O Pins : 14 (of which 6 provide PWM output)
- Analog Input Pins : 6
- DC Current per I/O Pin : 40 mA
- DC Current for : 3.3V Pin 50 mA
- Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM : 2 KB (ATmega328)
- EEPROM : 1 KB (ATmega328)
- Clock Speed : 16 MHz
Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino
₹446.01 (Inc. GST)₹377.97 (+18% GST Extra)
Specifications:
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
Pro Micro With The Bootloader ATmega32U4 5V/16MHz Module Controller Mega32U4 Leonardo For Arduino Micro USB Port
₹454.01 (Inc. GST)₹384.75 (+18% GST Extra)
Specification:
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection
Pro Micro With The Bootloader ATmega32U4 5V/16MHz Module Controller Mega32U4 Leonardo For Arduino Micro USB Type-C Port
₹446.01 (Inc. GST)₹377.97 (+18% GST Extra)
Specification:
- ATMega 32U4
- operating at 5V/16MHz
- Operating Voltage (logic level): 5V
- Supported under Arduino IDE v1.0.1
- Micro USB Type-C Port
- Onboard micro USB connector for programming
- 4 x 10-bit ADC pins
- 12 x Digital I/Os (5 are PWM capable)
- Serial connections for Rx and Tx devices
- 1 pair of TTL level serial transceiver ports RX / TX
- There is a bootloader installed in it