LM2596S DC-DC Buck Converter Power Supply

Specifications:

• Input DC 3.7 – 6V
• Output DC 200 – 400KV
• Spark between output wires

Features:

• Module Properties: Non-isolated boost (BOOST)
• Rectification: Non-Synchronous Rectification
• Input Voltage Range: 3V ~ 32V
• Output Voltage RAnge: 5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A)
• Input Current: 4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.)
• Conversion efficiency: <94% (greater the pressure, the lower the efficiency)
• Switching frequency: 400KHz
• Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)
• Load Regulation: ± 0.5%
• Voltage Regulation: ± 0.5%
• Operating Temperature: -40 ? ~ +85 ?
• Dimensions: 43mm * 21mm * 14mm (L * W * H)

Specification:

1. Input Voltage(VDC): 4 ~ 40.
2. Output Voltage(VDC): 1.3 ~ 37.
3. Output Current: 2A Rated, ( 3A maximum with heat sink).
4. Switching Frequency: 150 kHz.
5. Input reverse polarity protection.
6. Built-in output short protection function.

Specification:

• Input: DC 6.5V – 12V (input voltage must be more than output voltage (more than 1V))
• Output: 5.0V (+-0.05v error), 800mA (load current cannot exceed 800ma)
• Onboard AMS1117 chip.
• Onboard power indicator to indicate power is turned on: Red LED.
• Output voltage interface, connection to facilitate the experimental.
• Small Compact Size, 4Pin Type, Breadboard Friendly.
• 2P single row pin input and output for easy connection
• Dual-panel design, the layout is nice

Features:

1. Input voltage :6-35V
2. Output voltage: 6-55V (adjustable)
3. Output Current: 10A (MAX)
4. Input Current: 7A (MAX)
5. The non-isolated step-up power conversion module
6. Onboard LED illuminates when the voltage is applied to the module
7. Equips Multi-turn Potentiometer.