Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board

Specifications:

  • Power supply voltage(VCC): 2.0, 3, 5.5 V.
  • Output high VOH: 0.8VCC V
  • Output low VOL: 0.3VCC V
  • Response time (touch mode) : 60 mS
  • Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V) : 8 mA
  • Output pin pull-up current (@ VCC = 3V, VOH = 2.4V) : 4 mA
  • Response time (low power mode) : 220 mS
  • Size : 24 x 24 x 7.2 mm

 

SKU: RDNA-A1.15

Apple Shopping Event

Hurry and get discounts on all Apple devices up to 20%

Sale_coupon_15

75.00 (Inc. GST)
63.56 (+18% GST Extra)

In stock (can be backordered)

In stock (can be backordered)

12 People watching this product now!
  • Pick up from the RoboticsDNA Store in Pune / Dunzo

To pick up today

Free

  • Same Day Delivery in Pune

(Mon-Sat) (Please Place Order Before 1:30 PM)​

Rs. 99

  • via Delhivery.com (Express Mode)

Our courier will deliver to the specified address

3-5 Days

Rs. 149

  • via Delhivery.com (Surface Mode)

Our courier will deliver to the specified address

4-7 Days

Rs. 69

Payment Methods:

Description

It can control LED module, light and so on. It is available for indoor LED, lighting lamp, DIY automotive lights dimming refit.

With Single touch, using the principle of capacitance touch. The default function is a switch, dimming, with brightness memories LED touch dimming. It will light slowly when turning on the lights, and become dark slowly when turn off, which effectively avoid the stimulation to eyes.

The default function of the capacitor touch dimmer is a switch, dimming, with brightness memories LED touch dimming. It will light slowly when turning on the lights, and become dark slowly when turn off, which effectively avoid the stimulation to eyes.

The lamp brightness can be adjusted by requirement, it is very to operate. It can touch in medium protection, such as glass, acrylic, plastic, ceramics and so on, which is very safe.

PCB board(VCC,GND) is power input:
  1. (LED+, LED-) is connected with the LED lamps of positive and negative level (fingerprint) touch area
  2. Copper skin area should be 2x3cm.
  3. T1=1, T2=1: Without brightness memory, suddenly light and off LED touch Stepless dimming function.
  4. T1=0, T2=1: Without brightness memory, gradually light and off LED touch Stepless dimming function.
  5. T1=1, T2=0: With brightness memory, gradually light and off LED touch Stepless dimming function.
  6. T1=0,T2=0:LED three sections touch dimmer function.

Features:

  1. Low power consumption
  2. Power supply for 2 ~ 5.5V DC
  3. Can replace the traditional touch of a button
  4. Four M2 screws positioning holes for easy installation

You may also know :

Touch Sensors

Using method:
  1. Click touch (touch duration time is less than 550ms) can control the lamp. Click once, the lamp lights; click again, the lamp off. The initial brightness of lights lit the fixed for the whole brightness of 90%.
  2. Press the touch at a long time (touch duration time is more than 550ms), you can achieve step-less dimming the lights. Press long time once, light levels gradually increase light levels when released after the release time parked in the corresponding brightness, long time if more than three seconds, the light levels to achieve maximum brightness does not change; again long press touch, light levels gradually decreased to stop when you release the light levels in the corresponding brightness release time, if a long time more than three seconds, the light levels after reaching the minimum brightness does not change.

Package include:

1 x Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board

Specification

Overview

Processor

Display

RAM

Storage

Video Card

Connectivity

Features

Battery

General

Customer Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.