27 Pin breakout board BL touch ender 3d Printer

Features:

1. Wire type: 22AWG
2. Working voltage: 300V
3. Working Current: 2A
4. Temperature resistance: 80° C
   
5. Cable length: 70cm

Features:

1. RAMPS 1.4 2004 LCD Display intelligent controller.
2. LED background light control circuit, a small function of the intelligent controller, With pin short time to decide on all LED turn or steering 30 seconds
3. You can turn on the light time to do the long or short form of the adjustment TRIMM R4100K from 10 seconds to 2 minutes.
4. Plug and play on the RAMPS, but need to modify the firmware to support.
5. The product comes encoder parameter adjustment can be achieved, and the file selection print.
6. With an SD card base on the back, put slicing file into the SD card and select the file on the LCD, then can be printing.

Features :

1. Large screen display 128×64 LCD (3.2″)
2. SD card slot at the back, able to directly select a file and print
3. The product comes encoder parameter adjustment can be achieved, and the file selection print
4. Plug & play on the RAMPS, but need to modify the firmware to support.
5. LCD 12864 Smart Controller fully supported by Marlin Firmware.

Specification:

1. The superior performance of MOSFET (Max 280A).
2. An extra-large heat sink, the maximum current can be up to 30A or more.
3. Can use hot-bed output signal of Ramp1.4 and MKS series to control.
4. Can use the digital signal of 5-24v to control.

Specifications :

1. Input Voltage Range : 12V – 24V
2. Maximum Current (A) : 30
3. Length (mm) : 88
4. Width (mm) : 67
5. Height (mm) : 31.7
6. Weight (gm) : 130