Telephone Enquiry: +91 83296 49598/ +91 7507177602


More Categories Less Categories


0.96″ inch 128×64 OLED Display Module-6 Pin

349.28 (Including GST)

296.00 ( + 53.28 GST)


  1. OLED Driver IC: SSD1306
  2. Resolution: 128 x 64
  3. Visual Angle: >160°
  4. Display Color: Area Color (White)
  5. Input Voltage: 3.3V ~ 6V
  6. Compatible I/O Level: 3.3V, 5V
  7. Mini Size: 2.7 x 2.8cm
  8. Only Need 2 I/O Port to Control
  9. Full Compatible with Arduino
  10. Working temperature: -30°C ~ 70°C
  11. Module volume ( generous ): 27.0 x 27.0 x 4.1mm

Only 1 left in stock

Purchase this product now and earn 3 Points!

SKU: RDNA-3.14 Category:

Share this product


0.96 inch OLED Display Module is a precise small, White OLED module which can be interfaced with any microcontroller using SPI protocol. It is having a resolution of 128×64. The package includes a display board, display, 6 pin male header.

OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.

OLEDs’ basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML), and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material, and choice of electrode are the key factors that determine the quality of OLED components.

It can be used with either an SPI interface – selectable by soldering two jumpers on the again. The design is completely 5v-geared up, with an onboard regulator and constructed in a raise converter. It’s easier than ever to connect immediately for your 3v or 5v microcontroller without having any type of stage shifter.


  • Work perfectly well without the need of a backlight.
  • 128*64 high resolution, ultra-wide viewing angle
  • Super low power consumption–only 0.08W when the whole screen lights up and 0.06W when displaying characters
  • Fully compatible with multiple controlling chips including Arduino and more.
  • Support a wide range of voltage input

Package includes:

1 x 0.96inch 128×64 OLED Display Module-6 Pin


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.