KF1000 3Pin 10mm 25A 300V Barrier Terminal Block Connector – 2 Pcs

Specifications:

• Model: KF1000-3P
• Number of Poles: 3P (3 individual connection points)
• Mounting Type: PCB Mount (Designed for soldering directly onto a Printed Circuit Board)
• Pitch (Pin Spacing): 10.0 mm
  • This wide spacing provides excellent electrical isolation for higher voltages.
• Termination Method: Screw Connection
  • The screws are typically M4 size, often steel, and plated for corrosion resistance.
• Rated Voltage: Typically 300 Volts (300V) Maximum
• Rated Current: Typically 25 Amperes (25A) Maximum
  • The high current rating is supported by the connector’s robust design.
• Wire Range (Gauge): 22 – 12 AWG (American Wire Gauge)
  • This range accommodates thicker wires required for high-current applications.
• Max Torque: Approximately 0.98Nm (Newton-meters)
  • The recommended tightening force for the screws to ensure a secure connection.
• Housing Material: Usually PA66 (Polyamide), meeting UL94 V-0 flame retardant standards.
• Strip Length: 6 – 7 mm
  • The recommended length of wire insulation to strip before insertion.